64cb43dec8
Rework startup MWW and gain levels
2025-05-24 18:15:17 -04:00
e224044de3
Remove debug components
...
Slows down the ESP too much
2025-05-24 17:33:51 -04:00
450ff085d2
Increase noise suppression level to 3
2025-05-24 17:24:41 -04:00
f3d7b16aa9
Remove workaround connectivity check
2025-05-24 16:56:45 -04:00
e62b9a8b91
Actually fix conditional logic
2025-05-24 01:27:12 -04:00
9555fd37dc
Fix negation condition
2025-05-24 01:19:41 -04:00
b3b9fd7086
Add additional check for API connectivity
2025-05-24 01:17:15 -04:00
cec8d27a4a
Improve detection of connection
2025-05-24 01:02:44 -04:00
40f0ae215a
Adjust debug options for compatibility
2025-05-24 00:08:56 -04:00
90403f990b
Add debug sensor components
2025-05-24 00:06:14 -04:00
1eb8e2134f
Add log messages for API client connect/disconnect
2025-05-24 00:02:30 -04:00
6c32edc9a9
Fix models
2025-05-23 23:22:28 -04:00
7221213ac4
Rework Voice, Microphone, and MWW handling
...
Needed for recent changes in ESPHome and to properly align us with the
most recent developments. Includes support for multiple selectable wake
words as well.
2025-05-23 23:17:54 -04:00
28b76d0508
Adjust threshold values and set min_version
2025-05-23 22:57:36 -04:00
647e6711b8
Remove CPU frequency
...
Doesn't work on recent ESP-IDF versions it seems.
2025-05-21 16:57:38 -04:00
7d5d7da2e8
Remove esp-adf component
...
This causes numerous issues now, so remove it.
2025-05-21 16:54:32 -04:00
565df10fe0
Restore capitalization
2025-05-21 00:45:56 -04:00
21fc3436ee
Adjust wording of BME680 section
2025-05-20 18:14:07 -04:00
91d9ff2a43
Add README note about initial set value
2025-05-20 18:09:36 -04:00
1600417026
Fix initial set value
2025-05-20 12:43:36 -04:00
decf2ad244
Add 5 minute moving average to Sensirion sensors
...
Avoids constant wild shifts over time by performing a sliding window
moving average over the last 20 results (at 15s intervals).
2025-05-20 12:40:44 -04:00
6695f9eb6b
Set accuracy decimals of SHT45
...
Two decimal places is not required here.
2025-05-20 12:37:13 -04:00
3768589de2
Readd WiFi and LD2410 info
...
Was erroneously removed during cleanup.
2025-05-20 12:19:30 -04:00
713a693cef
Explicitly set 0 max duty for SHT heater
2025-05-20 12:15:16 -04:00
d680735be3
Adjust capitalization of project name
2025-05-20 11:58:42 -04:00
6cdf340c5b
Remove utemp module
2025-05-20 11:57:53 -04:00
4157ee2e65
Remove obsolete archives
2025-05-20 11:57:30 -04:00
e1840a37aa
Update refs for new repo
2025-05-20 11:53:54 -04:00
a095936f3f
Add SGP30 baseline sensors
2025-05-19 17:00:59 -04:00
547983173b
Add compensation values to SGP30
2025-05-19 16:58:22 -04:00
2145d4eff1
Decrease Sensirion interval to 15s
...
60s felt like far too long.
2025-05-19 16:56:51 -04:00
9fc8ad7318
Adjust eCO2 threshold for Excellent
2025-05-19 16:49:33 -04:00
66573f2346
Adjust Sensirion update interval
...
15s is a little too frequent, so make it 60s
2025-05-17 00:14:02 -04:00
a2ff9491a3
Fix GPIO pin assignments
2025-05-17 00:11:03 -04:00
1ef3ba2e57
Fix micro wake word model selector
2025-05-17 00:10:54 -04:00
97dd3a9a90
Fix table formatting
2025-05-11 20:02:48 -04:00
993c3407ea
Update board to 2.x revision
2025-05-11 20:00:35 -04:00
ae4713969d
Rename and update dashboard ref
2025-05-11 19:40:54 -04:00
dcf195e161
Update README to match
2025-05-11 02:20:42 -04:00
12d3c76f7c
Rework room health score calculation
2025-05-11 02:07:48 -04:00
5071dc908b
Remove obsolete v1.x config
2025-05-10 23:58:33 -04:00
28c38c49a7
Add 2.0 configuration
2025-05-10 23:58:00 -04:00
ce026f8a7b
Bump version to 1.3
2025-05-10 23:51:23 -04:00
df4bd66eaa
Enable MicroWakeWord by default.
...
This enables MWW by default. This has become more important since
HomeAssistant recently disabled offloaded WakeWord engines by default in
new Assist pipelines, ostensibly because "all" client devices now
support it.
Currently we are limited to just `hey_jarvis` until esphome/esphome#8655
lands in a release and enables dynamic configuration. This will be fully
implemented with the SuperSensor v2.0 coming later this month.
2025-05-10 23:47:33 -04:00
93fdbf9bd9
Restore 1 decimal place to pressure values
...
Let the frontend round if it wants to.
2025-04-24 00:11:59 -04:00
b6c8bb24b3
Round final value of relative pressure
2025-04-24 00:06:49 -04:00
cf8838d5a5
Add relative pressure calculations
2025-04-23 23:59:30 -04:00
742f718a81
Set pressure accuracy decimals
...
Since we're rounding to an integer now.
2025-04-21 10:26:56 -04:00
839ac6ce2a
Round pressure to int, add pressure offset, names
...
Helps ensure barometric pressure is accurate against a given reference
value and ensure names are grouped together.
2025-04-21 09:45:27 -04:00
0829025989
Lower brightness of disconnect flash
2025-04-19 04:29:55 -04:00
