It didn't make any sense to me for mem(prov) to be the default selector,
since this has too many caveats versus mem(free). Switch to using
mem(free) as the default (i.e. "mem") and make memprov the alternative.
Otherwise the node entries could come back in an arbitrary order; since
this is an ordered list of dictionaries that might not be expected by
the API consumers, so ensure it's always sorted.
1. Add documentation on the node selector flags. In the API, reference
the daemon configuration manual which now includes details in this
section; in the CLI, provide the help in "pvc vm define" in detail and
then reference that command's help in the other commands that use this
field.
2. Ensure the naming is consistent in the CLI, using the flag name
"--node-selector" everywhere (was "--selector" for "pvc vm" commands and
"--node-selector" for "pvc provisioner" commands).
Adds commands to both replace an OSD disk, and refresh (reimport) an
existing OSD disk on a new node. This handles the cases where an OSD
disk should be replaced (either due to upgrades or failures) or where a
node is rebuilt in-place and an existing OSD must be re-imported to it.
This should avoid the need to do a full remove/add sequence for either
case.
Also cleans up some aspects of OSD removal that are identical between
methods (e.g. using safe-to-destroy and sleeping after stopping) and
fixes a bug if an OSD does not truly exist when the daemon starts up.
Ensures that information like the FSIDs and the OSD LVM volume are
stored in Zookeeper at creation time and updated at daemon start time
(to ensure the data is populated at least once, or if the /dev/sdX
path changes).
This will allow safer operation of OSD removals and the potential
implementation of re-activation after node replacements.
Allows an administrator to adjust the PG count of a given pool. This can
be used to increase the PGs (for example after adding more OSDs) or
decrease it (to remove OSDs, reduce CPU load, etc.).
Allows specifying a particular device class ("tier") for a given pool,
for instance SSD-only or NVMe-only. This is implemented with Crush
rules on the Ceph side, and via an additional new key in the pool
Zookeeper schema which is defaulted to "default".
Solves two problems:
1. How match fuzziness was used was very inconsistent; make them all the
same, i.e. "if is_fuzzy and limit, apply .* to both sides".
2. Use re.fullmatch instead of re.match to ensure exact matching of the
regex to the value. Without fuzziness, this would sometimes cause
inconsistent behavior, for instance if a limit was non-fuzzy "vm",
expecting to match the actual "vm", but also matching "vm1" too.
Instead of requiring the VM to already be stopped, instead allow disable
state changes to perform a shutdown first. Also add a force option which
will do a hard stop instead of a shutdown.
References #148
Refactors some of the code in VXNetworkInterface to handle MTUs in a
more streamlined fashion. Also fixes a bug whereby bridge client
networks were being explicitly given the cluster dev MTU which might not
be correct. Now adds support for this option explicitly in the configs,
and defaults to 1500 for safety (the standard Ethernet MTU).
Addresses #144
When using the "state", "node", or "tag" arguments to a VM list, add
support for a "negate" flag to look for all VMs *not in* the state,
node, or tag state.
The default of 0.05 (5%) is likely ideal in the initial implementation,
but allow this to be set explicitly for maximum flexibility in
space-constrained or performance-critical use-cases.
Adds in three parts:
1. Create an API endpoint to create OSD DB volume groups on a device.
Passed through to the node via the same command pipeline as
creating/removing OSDs, and creates a volume group with a fixed name
(osd-db).
2. Adds API support for specifying whether or not to use this DB volume
group when creating a new OSD via the "ext_db" flag. Naming and sizing
is fixed for simplicity and based on Ceph recommendations (5% of OSD
size). The Zookeeper schema tracks the block device to use during
removal.
3. Adds CLI support for the new and modified API endpoints, as well as
displaying the block device and DB block device in the OSD list.
While I debated supporting adding a DB device to an existing OSD, in
practice this ended up being a very complex operation involving stopping
the OSD and setting some options, so this is not supported; this can be
specified during OSD creation only.
Closes#142
Ensures that a VM won't:
(a) Have provisioned more RAM than there is available on a given node.
Due to memory overprovisioning, this is simply a "is the VM memory count
more than the node count", and doesn't factor in free or used memory on
a node, total cluster usage, etc. So if a node has 64GB total RAM, the
VM limit is 64GB. It is up to an administrator to ensure sanity *below*
that value.
(b) Have provisioned more vCPUs than there are CPU cores on the node,
minus 2 to account for hypervisor/storage processes. Will ensure there
is no severe CPU contention caused by a single VM having more vCPUs than
there are actual execution threads available.
Closes#139
Adds a new API endpoint to support hot attach/detach of devices, and the
corresponding client-side logic to use this endpoint when doing VM
network/storage add/remove actions.
The live attach is now the default behaviour for these types of
additions and removals, and can be disabled if needed.
Closes#141
This should be managed in ceph.conf with the `rbd default
features` configuration option instead, and thus can be tailored to the
underlying OS version.
If this isn't, the resize will be interpreted as a MB value and result
in an absurdly big volume instead. This is the same consistency
validation that occurs on add.
Convert from human to bytes, then to megabytes and always pass this to
the RBD command. This ensures consistency regardless of what is actually
passed by the user.
We need to do a bit more finagling with the logger on termination to
ensure that all messages are written and the queue drained before
actually terminating.
Adds the ability to send node daemon logs to Zookeeper to facilitate a
command like "pvc node log", similar to "pvc vm log". Each node stores
its logs in a separate tree under "/logs" which can then be combined or
queried. By default, set by config, only 2000 lines are kept.
Add an additional protected class, limit manipulation to one at a time,
and ensure future flexibility. Also makes display consistent with other
VM elements.
Joshua Boniface