338af97a7a
Handle message about wait locks a bit better
2019-06-27 16:20:30 -04:00
1f4b5a6d65
Add little deploy script for testing purposes
2019-06-27 14:37:42 -04:00
77e215b0eb
Don't queue flushes without --wait
...
Don't try to queue up a flush when there is already a flush lock; direct
the user to use --wait (which will actually wait before triggering the
new action), or try again later.
2019-06-27 14:36:58 -04:00
d28b1ba133
Support removing VMs (and disks) from PVC clients
...
Adds full support for removing a VM entirely, including its RBD disks,
via the PVC client(s). Avoids needing an undefine + manual removal.
2019-06-27 11:19:48 -04:00
3e591bd09e
Remove extra whitespaces on blank lines
2019-06-25 22:33:23 -04:00
08cb16bfbc
Revamp VM migration handling
...
This was very old code that was hard to follow and quite fragile, with
failures and infinite loops occurring fairly frequently. These changes
make the code more robust, including the addition of timeouts, some code
cleanup, and some improvements to the logical flow.
Also forces the libvirt migration to occur on the cluster network, which
couples to changes in the libvirtd listen (via pvc-ansible) and in
Daemon.py via the previous commit.
2019-06-25 22:23:48 -04:00
d336fce253
Connect to actual IP not localhost for Libvirt
2019-06-25 22:09:32 -04:00
75d0e7f989
Revert "Only perform fencing duties on primary"
...
This reverts commit 464c69aac6
2019-06-25 12:36:48 -04:00
85a5a8a0c9
Disable tx offloading on bridge interfaces
...
Reference: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=717215#68
Without this, DHCP fails when traversing only the local bridge, for
Debian Jessie or earlier (and possibly other OSes as well), due to the
missing UDP checksums. This disables the offload and hence reenables
the checksums even on the software-only bridge.
Also rearranged the steps and added comments arround this section to
better clarify what each command is doing.
2019-06-25 12:36:37 -04:00
b52cf01ecc
Make conditionals more Pythonic
2019-06-25 12:36:37 -04:00
93be983b39
Properly verify node inputs
2019-06-25 12:36:37 -04:00
464c69aac6
Only perform fencing duties on primary
...
There was really no need for this to be shared among all the
coordinators, which seemed more fragile. This way only the primary will
try to fence dead nodes.
2019-06-24 20:17:51 -04:00
249611b161
Remove duplicate import
2019-06-24 20:14:43 -04:00
d8dca50af4
Ensure domain is always set
2019-06-24 12:59:32 -04:00
4922e973c7
Functionize duplicate code and fix net length bug
2019-06-24 10:10:07 -04:00
1316b9ed59
Fix refactoring bugs
2019-06-24 09:56:06 -04:00
e097e9e8af
Fix up status call
2019-06-21 16:40:12 -04:00
60e6df4416
Increase wait on OSD add/remove a bit more
2019-06-21 16:01:08 -04:00
9cec0c5b43
Remove extra bolding in lists
2019-06-21 15:57:50 -04:00
808e53fe29
Increase wait on OSD add/remove
2019-06-21 15:56:37 -04:00
d5e5ed4b69
Add hostname into confirmation
2019-06-21 15:54:54 -04:00
ef272b0b7d
Add removal confirmations and zap disk before add
2019-06-21 15:52:28 -04:00
26a4b3b757
Fix logic error in init
2019-06-21 15:38:32 -04:00
519203d7fd
Fix bad flag value
2019-06-21 15:09:15 -04:00
93d2e0da6f
Improve handling of init
2019-06-21 14:16:32 -04:00
c63b5a8056
Handle a no-valid-nodes situation
2019-06-21 11:37:35 -04:00
f3e9082376
Simplify fromhuman byte formatting
2019-06-21 10:18:35 -04:00
867ad1fc1b
Support human-readable biconversion and in volumes
2019-06-21 09:23:52 -04:00
3d3fa1b99f
Add write-lock-wait to all other Ceph commands
2019-06-21 09:05:00 -04:00
33bf3ee3cf
Add confirmation to cluster init
2019-06-21 09:02:58 -04:00
3dd56c55c0
Fix a few more bugs
2019-06-19 15:32:32 -04:00
97a3dafa3b
Fix bug in regex match for snapshots
2019-06-19 15:24:04 -04:00
822cf53a49
Nicer list handling for snapshots
2019-06-19 15:22:44 -04:00
ddedb1a992
Set image features to supported values
2019-06-19 15:19:36 -04:00
51256b4f0f
Fix bad bolding in lists
2019-06-19 15:16:22 -04:00
5d4ecafb03
Support listing of snapshots
2019-06-19 15:15:17 -04:00
0f15e7cda5
Set shutdown state after final keepalive
2019-06-19 14:52:47 -04:00
80de40252b
Add shutdown colour to output
2019-06-19 14:28:04 -04:00
0060c0313b
Put daemonstate to shutdown when stopping
...
This way it isn't "run" all the way until it shuts down.
2019-06-19 14:23:07 -04:00
39a45a1e0f
Fix bug with daemon_state
2019-06-19 14:19:00 -04:00
4ca0fe8f6f
Handle per-pool lists better
2019-06-19 14:11:03 -04:00
bc38af774e
Check that node is in run state before primary
...
Fixes #37
2019-06-19 12:49:34 -04:00
9a0554fdbe
Remove all volumes from pool on removal
...
Technically not needed, but otherwise random errors may be thrown,
so best to be explicit.
2019-06-19 12:49:03 -04:00
5e211837ad
Fix bug in output
2019-06-19 11:24:25 -04:00
e6a458f38c
Support listing volumes
2019-06-19 11:22:49 -04:00
87907d4ce8
Remove size field from volume objects
...
This data is just in the stats anyways.
2019-06-19 10:45:14 -04:00
09562fdc06
Output in json format instead
2019-06-19 10:32:01 -04:00
a940d03959
Fix some bugs and add RBD volume stats
2019-06-19 10:25:22 -04:00
db0b382b3d
Don't bother with snapshot management by Daemon
...
This is *definitely* not needed in the end, and just uses RAM for
no conceivable purpose. Snapshots are fully client-managed.
2019-06-19 09:43:04 -04:00
98365b0fcf
Correct bugs around snapshots
2019-06-19 09:41:33 -04:00
