Joshua Boniface
36e439c78e
Reset liveISO to bullseye
...
Bookworm seems to have a serious bug with PERC controllers causing the
drive to reset. This goes away with Bullseye, so use that instead.
2023-09-01 15:42:00 -04:00
Joshua Boniface
df4471c26c
Fix bug with active TTYs
2023-09-01 15:42:00 -04:00
Joshua Boniface
443678dee0
Add missing echo
2023-09-01 15:42:00 -04:00
Joshua Boniface
6cff55e63b
Add more improvements to install prompts
2023-09-01 15:42:00 -04:00
Joshua Boniface
50d62157ca
Use readline prompt if required
2023-09-01 15:42:00 -04:00
Joshua Boniface
83a837e72a
Use non-free-firmware for liveISO
2023-09-01 15:42:00 -04:00
Joshua Boniface
268b8824df
Better handle components for bookworm
2023-09-01 15:42:00 -04:00
Joshua Boniface
afbe330155
Use bookworm for liveISO
2023-09-01 15:42:00 -04:00
Joshua Boniface
48622b1dff
Improve menus for clarity
2023-09-01 15:42:00 -04:00
Joshua Boniface
48a35c8d60
Add bond support during initial network config
2023-09-01 15:42:00 -04:00
Joshua Boniface
12e316fd3e
Improve messages and chroot finals
2023-09-01 15:42:00 -04:00
Joshua Boniface
f047c79e54
Set discard on system disk if supported
2023-09-01 15:42:00 -04:00
Joshua Boniface
3fb6df84e1
Ensure python-is-python3 is installed on bullseye
2023-09-01 15:42:00 -04:00
Joshua Boniface
92eef048b2
Fix paths inside grub.cfg
2023-09-01 15:42:00 -04:00
Joshua Boniface
422ea1739f
Fix bootloader configuration for live env
2023-09-01 15:42:00 -04:00
Joshua Boniface
364b1234f3
Fix bad variable replacement
2023-09-01 15:41:59 -04:00
Joshua Boniface
0bf509ca9c
Fix incorrect variable reference
2023-09-01 15:41:59 -04:00
Joshua Boniface
6ba2666a8f
Update default mirror to UWaterloo (Rogers outage)
2023-09-01 15:41:59 -04:00
Joshua Boniface
6bcfaae391
Remove extra final phase of boot checks
2023-09-01 15:41:59 -04:00
Joshua Boniface
57c08b6de6
Add missing mkdir
2023-09-01 15:41:59 -04:00
Joshua Boniface
6156cd305a
Add bnxt_en to initramfs
2023-09-01 15:41:59 -04:00
Joshua Boniface
cc545fba44
Fix missing initrd= option for liveboot
2023-09-01 15:41:59 -04:00
Joshua Boniface
31b9162d5e
Remove obsolete flags from README
2023-09-01 15:41:59 -04:00
Joshua Boniface
7193b4e488
Make mirror server configurable
2023-09-01 15:41:59 -04:00
Joshua Boniface
fcc4c992e6
Switch to Rafal's mirror
...
The official mirror is very slow and has problems with connectivity
sometimes.
2023-09-01 15:41:59 -04:00
Joshua Boniface
87a3275daa
Remove internal poweroff after hook completion
2023-09-01 15:41:59 -04:00
Joshua Boniface
d6e93b04cc
Go back to buster
...
For some reason LB keeps installing buster anyways.
2023-09-01 15:41:59 -04:00
Joshua Boniface
79de677a96
Add support for cross-arch ISOs
...
Initial support for arm64 installer support, as well as supporting
building the amd64 files on arm64 (i.e. an RPi3/4)
2023-09-01 15:41:59 -04:00
Joshua Boniface
17f6cb51d1
Move into script dirs before running
2023-09-01 15:41:59 -04:00
Joshua Boniface
982614e3c1
Run buildiso.sh with a full path
2023-09-01 15:41:59 -04:00
Joshua Boniface
c590411301
Add nicer output for detects
2023-09-01 15:41:59 -04:00
Joshua Boniface
0d32e27ea9
Modify detect match to 3%
...
This will handle corner cases of RAID devices that are a little smaller
than expected (300GB -> 293GB), which were a little outside the 2%
range, while still being close enough.
2023-09-01 15:41:59 -04:00
Joshua Boniface
98337295b1
Flip ID to end of detect string
...
This just seems to "flow" more for me.
2023-09-01 15:41:59 -04:00
Joshua Boniface
ec23da72a7
Add delay during checkin script
2023-09-01 15:41:59 -04:00
Joshua Boniface
cc68ce54b6
Replace block zeroing with wipefs
...
This is very time consuming and intensive on the disks and really
doesn't do anything, so use wipefs.
2023-09-01 15:41:59 -04:00
Joshua Boniface
c7e8f0cd6a
Fix weird spacing
2023-09-01 15:41:59 -04:00
Joshua Boniface
dba6965294
Fix period finding and failures
2023-09-01 15:41:59 -04:00
Joshua Boniface
13e93b89d4
Add lsscsi to suppkglist
2023-09-01 15:41:59 -04:00
Joshua Boniface
ab6e6b5c6a
Adjust comment to reflect group_vars
2023-09-01 15:41:58 -04:00
Joshua Boniface
e8aed11693
Handle target_disk detection strings
...
For preseed installs with pvcbootstrapd, implement "detect" strings,
which can be used instead of fixed block paths to determine the required
disk from a fixed set of information available to a human provisioning
the servers, or from Redfish.
The basic idea is thus:
1. The user specifies some physical attributes of the disk, either
manually in a detect string of the preseed configuration, or by a
physical identifier that Redfish can identify.
2. Redfish takes this and either passes it, or crafts a detect string
itself based on its storage information, which is then passed to the
installer preseed as the target_disk value.
3. The installer uses the provided values along with the output of the
"lsscsi" command to determine which block device to use for the system
disk.
This supersedes and enhances the original "model-based" detection with
far greater reliability and the ability to specify specific indexes.
2023-09-01 15:41:58 -04:00
Joshua Boniface
05e567c667
Add lsscsi to installer
2023-09-01 15:41:58 -04:00
Joshua Boniface
ab7662c6de
Fix template for updated pvcbootstrapd
2023-09-01 15:41:58 -04:00
Joshua Boniface
36ffc2cebf
Fix boot.ipxe name and add host-ipxe template
2023-09-01 15:41:58 -04:00
Joshua Boniface
5ebc1a76d0
Restandardize arguments to checkin
2023-09-01 15:41:58 -04:00
Joshua Boniface
8062f4bad8
Adjust name of checkin URI
2023-09-01 15:41:58 -04:00
Joshua Boniface
2622e2136f
Adjust names of checking actions
2023-09-01 15:41:58 -04:00
Joshua Boniface
88696a7bba
Simplify hook check and move rm task
2023-09-01 15:41:58 -04:00
Joshua Boniface
18ab16e86d
Redirect cURL output to stderr
2023-09-01 15:41:58 -04:00
Joshua Boniface
5cfe70d021
Respawn instead of reboot if script fails
2023-09-01 15:41:58 -04:00
Joshua Boniface
b2e3df099e
Suppress useless output
2023-09-01 15:41:58 -04:00
Joshua Boniface