parallelvirtualcluster
/
pvc-installer
1
0
Fork 0
Code Issues 1 Pull Requests Projects Releases Wiki Activity

Add more improvements to install prompts

This commit is contained in:
Joshua Boniface 2023-09-01 15:42:00 -04:00
parent 50d62157ca
commit 6cff55e63b
1 changed files with 21 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
templates/install.sh
View File

@ -35,7 +35,7 @@ if [[ ${#active_ttys} -gt 1 ]]; then
else
echo "Found more than one graphical TTY!"
echo -n "If you wish to run the installer on this graphical TTY, press enter within 60 seconds... "
if ! read -t 60; then
if ! read -t 60 _d; then
echo "timeout."
echo "To launch the installer again on this TTY, run '/install.sh'."
exit 0
@ -76,7 +76,7 @@ default_filesystem="ext4"
supported_debrelease="buster bullseye bookworm"
default_debrelease="bookworm"
default_debmirror="http://mirror.csclub.uwaterloo.ca/debian"
default_debmirror="http://ftp.debian.org/debian"
# Base packages (installed by debootstrap)
basepkglist="lvm2,parted,gdisk,sudo,vim,gpg,gpg-agent,openssh-server,vlan,ifenslave,python3,ca-certificates,curl"
@ -348,13 +348,16 @@ interactive_config() {
echo "| Section 2: Disk setup |"
echo "--------------------------------------------------------"
echo
echo "2a) Please enter the disk to install the PVC base system to. This disk will be"
echo "wiped, an LVM PV created on it, and the system installed to this LVM."
echo "2a) Please enter the disk to install the PVC base system to. This disk will be WIPED,"
echo "an LVM PV created on it, and the system installed to this LVM."
echo
echo "* NOTE: PVC requires a disk of at least 30GB to be installed to, and 100GB is the"
echo "recommended minimum size for optimal production partition sizes."
echo "* NOTE: For optimal performance, this disk should be high-performance flash (SSD, etc.)."
echo "* NOTE: This disk should be a RAID-1 volume configured in hardware, or a durable storage"
echo "device, maximum redundancy and resiliency."
echo
echo "* NOTE: This disk should be high-performance flash (SSD, etc.)."
echo
echo "* NOTE: This disk should be a RAID-1 volume configured in hardware, or a very durable"
echo "storage device, for maximum redundancy and resiliency."
echo
echo "Available disks:"
echo
@ -398,17 +401,21 @@ interactive_config() {
echo
done
for interface in $( ip address | grep '^[0-9]' | grep 'eno\|enp\|ens\|wlp' | awk '{ print $2 }' | tr -d ':' ); do
ip link set ${interface} up
done
sleep 2
interfaces="$(
ip address | grep '^[0-9]' | grep 'eno\|enp\|ens\|wlp' | awk '{ print $2"\t"$3 }' | tr -d ':'
)"
echo "--------------------------------------------------------"
echo "| Section 3: Networking |"
echo "--------------------------------------------------------"
echo
echo -n "Probing interfaces... "
for interface in $( ip address | grep '^[0-9]' | grep 'eno\|enp\|ens\|wlp' | awk '{ print $2 }' | tr -d ':' ); do
ip link set ${interface} up
done
sleep 5
interfaces="$(
ip address | grep '^[0-9]' | grep 'eno\|enp\|ens\|wlp' | awk '{ print $2"\t"$3 }' | tr -d ':'
)"
echo "done."
echo "Available interfaces:"
echo
echo -e "$( sed 's/\(.*\)/ \1/' <<<"${interfaces[@]}" )"