Commit Graph

537 Commits

Author SHA1 Message Date
Joshua Boniface f1df1cfe93 Bump version to 0.9.55 2022-10-04 13:21:40 -04:00
Joshua Boniface 096bcdfd75 Try a literal eval first
This is a breakage between the older version of Celery (Deb10) and
newer. The hard removal broke Deb10 instances.

So try that first, and on failure, assume newer Celery format.
2022-09-06 10:34:50 -04:00
Joshua Boniface 239c392892 Bump version to 0.9.54 2022-08-23 11:01:05 -04:00
Joshua Boniface d8e57a26c5 Fix bad variable name 2022-08-18 11:37:57 -04:00
Joshua Boniface 9b499b9f48 Bump version to 0.9.53 2022-08-12 17:47:11 -04:00
Joshua Boniface 2a21d48128 Bump version to 0.9.52 2022-08-12 11:09:25 -04:00
Joshua Boniface 171f6ac9ed Add missing cluster_req for vm modify 2022-08-02 10:02:26 -04:00
Joshua Boniface 645b525ad7 Bump version to 0.9.51 2022-07-25 23:25:41 -04:00
Joshua Boniface 71ffd5a191 Add confirmation to disable command 2022-07-21 16:43:37 -04:00
Joshua Boniface 2739c27299 Remove faulty literal_eval 2022-07-18 13:35:15 -04:00
Joshua Boniface 932b3c55a3 Bump version to 0.9.50 2022-07-06 16:01:14 -04:00
Joshua Boniface d8d3feee22 Add selector help and adjust flag name
1. Add documentation on the node selector flags. In the API, reference
the daemon configuration manual which now includes details in this
section; in the CLI, provide the help in "pvc vm define" in detail and
then reference that command's help in the other commands that use this
field.

2. Ensure the naming is consistent in the CLI, using the flag name
"--node-selector" everywhere (was "--selector" for "pvc vm" commands and
"--node-selector" for "pvc provisioner" commands).
2022-06-10 02:42:06 -04:00
Joshua Boniface b1357cafdb Add memfree to selector and use proper defaults 2022-06-10 02:03:12 -04:00
Joshua Boniface 51ad2058ed Bump version to 0.9.49 2022-05-06 15:49:39 -04:00
Joshua Boniface c401a1f655 Use consistent language for primary mode
I didn't call it "router" anywhere else, but the state in the list is
called "coordinator" so, call it "coordinator mode".
2022-05-06 15:40:52 -04:00
Joshua Boniface 7a40c7a55b Add support for replacing/refreshing OSDs
Adds commands to both replace an OSD disk, and refresh (reimport) an
existing OSD disk on a new node. This handles the cases where an OSD
disk should be replaced (either due to upgrades or failures) or where a
node is rebuilt in-place and an existing OSD must be re-imported to it.

This should avoid the need to do a full remove/add sequence for either
case.

Also cleans up some aspects of OSD removal that are identical between
methods (e.g. using safe-to-destroy and sleeping after stopping) and
fixes a bug if an OSD does not truly exist when the daemon starts up.
2022-05-06 15:32:06 -04:00
Joshua Boniface 8027a6efdc Improve handling of rounded values 2022-05-02 15:29:30 -04:00
Joshua Boniface 5807351405 Bump version to 0.9.48 2022-04-29 15:03:52 -04:00
Joshua Boniface d6ca74376a Fix bugs with forced removal 2022-04-29 14:03:07 -04:00
Joshua Boniface 413100a147 Ensure unresponsive OSDs still display in list
It is still useful to see such dead OSDs even if they've never checked
in or have not checked in for quite some time.
2022-04-29 12:11:52 -04:00
Joshua Boniface 4d698be34b Add OSD removal force option
Ensures a removal can continue even in situations where some step(s)
might fail, for instance removing an obsolete OSD from a replaced node.
2022-04-29 11:16:33 -04:00
Joshua Boniface 53aed0a735 Use a singular configured cluster by default
If there is...
  1. No '--cluster' passed, and
  2. No 'local' cluster, and
  3. There is exactly one cluster configured
...then use that cluster by default in the CLI.
2022-01-13 18:36:20 -05:00
Joshua Boniface ea709f573f Bump version to 0.9.47 2021-12-28 22:03:08 -05:00
Joshua Boniface 1142454934 Add pool PGs count modification
Allows an administrator to adjust the PG count of a given pool. This can
be used to increase the PGs (for example after adding more OSDs) or
decrease it (to remove OSDs, reduce CPU load, etc.).
2021-12-28 21:53:29 -05:00
Joshua Boniface bbfad340a1 Add PGs count to pool list 2021-12-28 21:12:02 -05:00
Joshua Boniface 25fe45dd28 Add device class tiers to Ceph pools
Allows specifying a particular device class ("tier") for a given pool,
for instance SSD-only or NVMe-only. This is implemented with Crush
rules on the Ceph side, and via an additional new key in the pool
Zookeeper schema which is defaulted to "default".
2021-12-28 20:58:15 -05:00
Joshua Boniface 58d57d7037 Bump version to 0.9.46 2021-12-28 15:02:14 -05:00
Joshua Boniface abc23ebb18 Handle detect strings as arguments for blockdevs
Allows specifying blockdevs in the OSD and OSD-DB addition commands as
detect strings rather than actual block device paths. This provides
greater flexibility for automation with pvcbootstrapd (which originates
the concept of detect strings) and in general usage as well.
2021-12-28 02:53:02 -05:00
Joshua Boniface 9f122e916f Allow bypassing confirm message for benchmarks 2021-12-23 21:00:42 -05:00
Joshua Boniface 3ce4d90693 Add auditing to local syslog from PVC client
This ensures that any client command is logged by the local system.
Helps ensure Accounting for users of the CLI. Currently logs the full
command executed along with the $USER environment variable contents.
2021-12-10 16:17:33 -05:00
Joshua Boniface 8470dfaa29 Fix bugs with legacy benchmark format 2021-11-26 11:42:35 -05:00
Joshua Boniface f164d898c1 Bump version to 0.9.45 2021-11-25 09:34:20 -05:00
Joshua Boniface 195f31501c Ensure echo always has an argument 2021-11-25 09:33:26 -05:00
Joshua Boniface 817dffcf30 Bump version to 0.9.44 2021-11-11 16:20:38 -05:00
Joshua Boniface 135d28e60b Add 0.05s to connection timeout
This is recommended by the Python Requests documentation:

> It’s a good practice to set connect timeouts to slightly larger than a
  multiple of 3, which is the default TCP packet retransmission window.
2021-11-08 03:11:41 -05:00
Joshua Boniface e7d7378bae Use separate connect and data timeouts
This allows us to keep a very low connect timeout of 3 seconds, but also
ensure that long commands (e.g. --wait or VM disable) can take as long
as the API requires to complete.

Avoids having to explicitly set very long single-instance timeouts for
other functions which would block forever on an unreachable API.
2021-11-08 03:10:09 -05:00
Joshua Boniface 6e9fcd38a3 Bump version to 0.9.43 2021-11-08 02:29:17 -05:00
Joshua Boniface ea19af6494 Allow American spelling for compatibility 2021-11-08 00:09:59 -05:00
Joshua Boniface 7069d3237c Shorten help messages slightly to fit 2021-11-08 00:07:21 -05:00
Joshua Boniface 619c3f7ff5 Add forced colour support
Allows preserving colour within e.g. watch, where Click would normally
determine that it is "not a terminal". This is done via the wrapper echo
which filters via the local config.
2021-11-08 00:04:20 -05:00
Joshua Boniface 21b4bbe51a Apply more granular timeout formatting
We don't need to wait forever if state changes aren't waiting or disable
(which does a shutdown before returning).
2021-11-06 13:34:03 -04:00
Joshua Boniface 87ec31c023 Up timeout when setting VM state
Ensures the API won't time out immediately especially during a
wait-flagged or disable action.
2021-11-06 04:15:10 -04:00
Joshua Boniface 006f40f195 Add disable forcing to CLI
References #148
2021-11-06 04:02:50 -04:00
Joshua Boniface 66bfad3109 Fix linting errors F522/F523 unused args 2021-11-06 03:24:50 -04:00
Joshua Boniface c41664d2da Reformat code with Black code formatter
Unify the code style along PEP and Black principles using the tool.
2021-11-06 03:02:43 -04:00
Joshua Boniface 12eef58d42 Fix ordering to show correct message 2021-10-27 13:37:52 -04:00
Joshua Boniface f2e6892fd2 Support adding the same network to a VM again
This is a supported configuration for some edge cases and should be
allowed.
2021-10-27 13:33:27 -04:00
Joshua Boniface d87bea4159 More gracefully handle restart + live
Instead of erroring, just use the implication that restarting a VM does
not want a live modification, and proceed from there. Update the help
text to match.
2021-10-27 13:23:39 -04:00
Joshua Boniface 3a6f442856 Support removing VM interfaces by MAC
Provides a way to handle multiple interfaces in the same network
gracefully, while making the previous behaviour explicit.
2021-10-27 13:20:05 -04:00
Joshua Boniface e88147db4a Bump version to 0.9.42 2021-10-12 15:25:42 -04:00
Joshua Boniface 3f78ca1cc9 Add explicit 3 second timeout to requests 2021-10-11 16:31:18 -04:00
Joshua Boniface e866335918 Add version function support to CLI 2021-10-11 15:34:41 -04:00
Joshua Boniface f13cc04b89 Bump version to 0.9.41 2021-10-09 19:39:21 -04:00
Joshua Boniface d2c18d7b46 Fix bad header length in network list 2021-10-09 18:50:32 -04:00
Joshua Boniface 8f71a6d2f6 Add MTU support to network add/modify commands
Addresses #144
2021-10-09 18:06:21 -04:00
Joshua Boniface c27359c4bf Bump version to 0.9.40 2021-10-07 14:42:04 -04:00
Joshua Boniface bdb9db8375 Bump version to 0.9.39 2021-10-07 11:52:38 -04:00
Joshua Boniface c0f7ba0125 Add limit negation to VM list
When using the "state", "node", or "tag" arguments to a VM list, add
support for a "negate" flag to look for all VMs *not in* the state,
node, or tag state.
2021-10-07 11:50:52 -04:00
Joshua Boniface da9248cfa2 Bump version to 0.9.38 2021-10-03 22:32:41 -04:00
Joshua Boniface aa035a61a7 Correct latency units and format name 2021-10-03 17:06:34 -04:00
Joshua Boniface 7c8ba56561 Revamp test result display
Instead of showing CLAT percentiles, which are very hard to interpret
and understand, instead use the main latency buckets.
2021-10-03 15:49:01 -04:00
Joshua Boniface 7c122ac921 Add benchmark format to list 2021-10-03 15:05:58 -04:00
Joshua Boniface 0dbf139706 Adjust ETA for benchmarks 2021-10-02 04:51:01 -04:00
Joshua Boniface c909beaf6d Add format parsing for format 1 storage benchmarks 2021-10-02 04:46:44 -04:00
Joshua Boniface 2da49297d2 Add version 2 benchmark list formatting 2021-10-02 02:47:17 -04:00
Joshua Boniface 0058f19d88 Fix handling of array of information
With a benchmark info we only ever want test one, so pass only that to
the formatter. Simplifies the format function.
2021-10-02 01:28:39 -04:00
Joshua Boniface 056cf3740d Avoid versioning benchmark lists
This wouldn't work since each individual test is versioned. Instead add
a placeholder for later once additional format(s) are defined.
2021-10-02 01:25:18 -04:00
Joshua Boniface 58f174b87b Add format option to benchmark info
Allows specifying of raw json or json-pretty formats in addition to the
"pretty" formatted option.
2021-10-02 01:13:50 -04:00
Joshua Boniface 37b98fd54f Add benchmark format function support
Allows choosing different list and info functions based on the benchmark
version found. Currently only implements "legacy" version 0 with more to
be added.
2021-10-02 01:07:25 -04:00
Joshua Boniface ce06e4d81b Load benchmark results as JSON
Load the JSON at the API side instead of client side, because that's
what the API doc says it is and it just makes more sense.
2021-09-30 23:40:24 -04:00
Joshua Boniface 23977b04fc Bump version to 0.9.37 2021-09-30 02:08:14 -04:00
Joshua Boniface bb1cca522f Revamp benchmark tests
1. Move to a time-based (60s) benchmark to avoid these taking an absurd
amount of time to show the same information.

2. Eliminate the 256k random benchmarks, since they don't really add
anything.

3. Add in a 4k single-queue benchmark as this might provide valuable
insight into latency.

4. Adjust the output to reflect the above changes.

While this does change the benchmarking, this should not invalidate any
existing benchmarks since most of the test suit is unchanged (especially
the most important 4M sequential and 4K random tests). It simply removes
an unused entry and adds a more helpful one. The time-based change
should not significantly affect the results either, just reduces the
total runtime for long-tests and increase the runtime for quick tests to
provide a better picture.
2021-09-29 20:51:30 -04:00
Joshua Boniface ee4266f8ca Tweak CLI helptext around OSD actions
Adds some more detail about OSD commands and their values.
2021-09-26 01:29:23 -04:00
Joshua Boniface a438a4155a Fix OSD creation for partition paths and fix gdisk
The previous implementation did not work with /dev/nvme devices or any
/dev/disk/by-* devices due to some logical failures in the partition
naming scheme, so fix these, and be explicit about what is supported in
the PVC CLI command output.

The 'echo | gdisk' implementation of partition creation also did not
work due to limitations of subprocess.run; instead, use sgdisk which
allows these commands to be written out explicitly and is included in
the same package as gdisk.
2021-09-26 00:12:28 -04:00
Joshua Boniface 65df807b09 Add support for configurable OSD DB ratios
The default of 0.05 (5%) is likely ideal in the initial implementation,
but allow this to be set explicitly for maximum flexibility in
space-constrained or performance-critical use-cases.
2021-09-24 01:06:39 -04:00
Joshua Boniface d0f3e9e285 Bump version to 0.9.36 2021-09-23 14:01:38 -04:00
Joshua Boniface adc8a5a3bc Add separate OSD DB device support
Adds in three parts:

1. Create an API endpoint to create OSD DB volume groups on a device.
Passed through to the node via the same command pipeline as
creating/removing OSDs, and creates a volume group with a fixed name
(osd-db).

2. Adds API support for specifying whether or not to use this DB volume
group when creating a new OSD via the "ext_db" flag. Naming and sizing
is fixed for simplicity and based on Ceph recommendations (5% of OSD
size). The Zookeeper schema tracks the block device to use during
removal.

3. Adds CLI support for the new and modified API endpoints, as well as
displaying the block device and DB block device in the OSD list.

While I debated supporting adding a DB device to an existing OSD, in
practice this ended up being a very complex operation involving stopping
the OSD and setting some options, so this is not supported; this can be
specified during OSD creation only.

Closes #142
2021-09-23 13:59:49 -04:00
Joshua Boniface 772807deb3 Bump version to 0.9.35 2021-09-13 02:20:46 -04:00
Joshua Boniface e962743e51 Add VM device hot attach/detach support
Adds a new API endpoint to support hot attach/detach of devices, and the
corresponding client-side logic to use this endpoint when doing VM
network/storage add/remove actions.

The live attach is now the default behaviour for these types of
additions and removals, and can be disabled if needed.

Closes #141
2021-09-12 19:33:00 -04:00
Joshua Boniface 694b8e85a0 Bump version to 0.9.34 2021-08-24 16:15:25 -04:00
Joshua Boniface 5b81e59481 Convert argument elements of task status to types 2021-08-23 14:28:12 -04:00
Joshua Boniface a18cef5f25 Bump version to 0.9.33 2021-08-21 03:28:48 -04:00
Joshua Boniface f6c5aa9992 Avoid failing if no provisioner tasks 2021-08-21 03:25:16 -04:00
Joshua Boniface afdf254297 Bump version to 0.9.32 2021-08-19 12:37:58 -04:00
Joshua Boniface 13e309b450 Fix colours of network status elements 2021-08-18 19:41:53 -04:00
Joshua Boniface 7ecc6a2635 Bump version to 0.9.31 2021-07-30 12:08:12 -04:00
Joshua Boniface 2a99a27feb Bump version to 0.9.30 2021-07-20 00:01:45 -04:00
Joshua Boniface fa1d93e933 Bump version to 0.9.29 2021-07-19 16:55:41 -04:00
Joshua Boniface 71e4d0b32a Bump version to 0.9.28 2021-07-19 09:29:34 -04:00
Joshua Boniface f16bad4691 Revamp confirmation options for vm modify
Before, "-y"/"--yes" only confirmed the reboot portion. Instead, modify
this to confirm both the diff portion and the restart portion, and add
separate flags to bypass one or the other independently, ensuring the
administrator has lots of flexibility. UNSAFE mode implies "-y" so both
would be auto-confirmed if that option is set.
2021-07-19 00:25:43 -04:00
Joshua Boniface 15d92c483f Bump version to 0.9.27 2021-07-19 00:03:40 -04:00
Joshua Boniface 7dd17e71e7 Fix bug with VM editing with file
Current config is needed for the diff but it was in a conditional.
2021-07-19 00:02:19 -04:00
Joshua Boniface 602093029c Bump version to 0.9.26 2021-07-18 20:49:52 -04:00
Joshua Boniface 2358ad6bbe Reduce the number of lines per call
500 was a lot every half second; 200 seems more reasonable. Even a fast
kernel boot should generate < 200 lines in half a second.
2021-07-18 20:23:45 -04:00
Joshua Boniface a0e9b57d39 Increase log line frequency 2021-07-18 20:19:59 -04:00
Joshua Boniface 2d48127e9c Use even better/faster set comparison 2021-07-18 20:18:35 -04:00
Joshua Boniface 55f2b00366 Add some spaces for better readability 2021-07-18 20:18:23 -04:00
Joshua Boniface ba257048ad Improve output formatting of node logs 2021-07-18 20:06:08 -04:00
Joshua Boniface a088aa4484 Add node log functions to API and CLI 2021-07-18 18:54:28 -04:00
Joshua Boniface 8f3b68d48a Mention multiple option for tags in VM define 2021-07-14 01:12:10 -04:00
Joshua Boniface 6d4c26c8d8 Don't show tag line in info if no tags 2021-07-14 00:59:24 -04:00
Joshua Boniface 75fb60b1b4 Add VM list filtering by tag
Uses same method as state or node filtering, rather than altering how
the main LIMIT field works.
2021-07-14 00:59:20 -04:00
Joshua Boniface 9ea9ac3b8a Revamp tag handling and display
Add an additional protected class, limit manipulation to one at a time,
and ensure future flexibility. Also makes display consistent with other
VM elements.
2021-07-13 22:39:52 -04:00
Joshua Boniface 2e9f6ac201 Bump version to 0.9.25 2021-07-11 23:19:09 -04:00
Joshua Boniface 551bae2518 Bump version to 0.9.24 2021-07-09 15:58:36 -04:00
Joshua Boniface 9d0eb20197 Mention UUID matching in vm list help 2021-07-09 11:51:20 -04:00
Joshua Boniface 3f5b7045a2 Allow raw listing of cluster names in CLI 2021-07-09 10:53:20 -04:00
Joshua Boniface 7082982a33 Bump version to 0.9.23 2021-07-05 23:40:32 -04:00
Joshua Boniface 54f82a3ea0 Fix bug in VM network list with SR-IOV 2021-07-05 15:14:01 -04:00
Joshua Boniface 37cd278bc2 Bump version to 0.9.22 2021-07-05 14:18:51 -04:00
Joshua Boniface 087c23859c Adjust layout of Provisioner lists output
Use the same header format as the others.
2021-07-05 14:06:22 -04:00
Joshua Boniface 6c21a52714 Adjust layout of Ceph/storage lists output
Use the same header format as node, VM, and network lists.
2021-07-05 12:57:18 -04:00
Joshua Boniface afde436cd0 Adjust layout of Network lists output
Use the same header format as node and VM lists.
2021-07-05 11:48:39 -04:00
Joshua Boniface 1fe71969ca Adjust layout of VM list output
Matches the new node list output format with the additional header line,
as well as revamps some other aspects:

    1. Adjusts the UUID to be under the name in the info output.
    2. Removes the UUID from the list output to save space, because this
       is generally not needed in day-to-day quick-list output.
    3. Renames the "Node" header to "Current" to better reflect what
       that column actually means and avoid conflicting with the parent
       header.
2021-07-05 10:52:48 -04:00
Joshua Boniface 2b04df22a6 Add PVC version to node information output
Also adjusts the layout of the node list output to avoid excessively
long lines. Adds another header line with categories and spacing dashes
for easier visual parsing.
2021-07-05 10:45:20 -04:00
Joshua Boniface fe0a1d582a Bump version to 0.9.21 2021-06-29 19:21:31 -04:00
Joshua Boniface ffdd6bf3f8 Fix typo in command argument 2021-06-29 18:22:39 -04:00
Joshua Boniface bbb132414c Restore shebang and don't do store if completion 2021-06-23 05:26:50 -04:00
Joshua Boniface 04fa63f081 Only hit the network endpoint once
Otherwise this is hit for every VM which gets very slow very fast.
2021-06-23 05:15:48 -04:00
Joshua Boniface f248d579df Convert pvc-client-cli into a proper Python module
Also fixes up the Debian packaging such that this works how I would
want, with proper module installation while leaving everything else
untouched. Finally implements automatic installation and removal of the
BASH completion for the PVC command.
2021-06-23 05:03:19 -04:00
Joshua Boniface 1ae34c1960 Fix bad messages in volume remove 2021-06-22 04:31:02 -04:00
Joshua Boniface e6b26745ce Adjust some help messages in pvc.py 2021-06-22 03:40:21 -04:00
Joshua Boniface 7d2a3b5361 Ensure Macvtap NICs can use a model
Defaults to virtio like a bridged NIC. Otherwise performance is abysmal.
2021-06-22 02:38:16 -04:00
Joshua Boniface 1787a970ab Fix bug in address check format string 2021-06-22 02:21:32 -04:00
Joshua Boniface b532bc9104 Add missing managed flag for hostdev 2021-06-21 23:22:36 -04:00
Joshua Boniface eeb83da97d Add support for SR-IOV NICs to VMs 2021-06-21 23:18:22 -04:00
Joshua Boniface 13cc0f986f Implement SR-IOV VF config set
Also fixes some random bugs, adds proper interface sorting, and assorted
tweaks.
2021-06-21 18:40:11 -04:00
Joshua Boniface e13baf8bd3 Add initial SR-IOV list/info to CLI 2021-06-21 17:12:53 -04:00
Joshua Boniface 164becd3ef Fix info and list matching 2021-06-15 02:32:34 -04:00
Joshua Boniface da48304d4a Avoid hackery in VNI list and support direct type 2021-06-15 00:31:13 -04:00
Joshua Boniface ddd3eeedda Remove needless literal_eval statements 2021-06-14 01:46:30 -04:00
Joshua Boniface a2205bec13 Allow VM dump to file directly
Similar to the cluster backup task.
2021-06-13 22:32:54 -04:00
Joshua Boniface 7727221b59 Correctly use the Click file in backups 2021-06-13 22:17:35 -04:00
Joshua Boniface a48bf2d71e More gracefully handle none selectors
Allow selection of "none" as the node selector, and handle this by
always using the cluster default instead of writing it in.
2021-06-01 11:13:13 -04:00
Joshua Boniface a1969eb981 Allow overwrite during init command 2021-05-31 00:12:28 -04:00
Joshua Boniface 3128c8fa70 Correct flawed conditional in some commands 2021-05-25 09:59:20 -04:00
Joshua Boniface f46c2e7f6a Implement VM rename functionality
Closes #125
2021-05-23 17:21:19 -04:00
Joshua Boniface 1b8b101b64 Fix bugs in log follow command 2021-05-19 16:22:48 -04:00
Joshua Boniface 62c84664fc Handle restart confirmation for VMs more nicely
For the "vm modify", revamp the way confirmations are presented. Do the
edits/load, show changes, verify XML, then prompt to write and the
restart. The previous order didn't make much sense.

For any of these `--restart` triggered VM modifications, also alter how
the confirmation works. If the user declines the restart, do not abort;
instead, just set restart=False and continue with the modification.
2021-04-13 10:35:26 -04:00
Joshua Boniface 66f1ac35ab Skip an empty local cluster in cluster list 2021-04-13 10:01:49 -04:00
Joshua Boniface 529f99841d Improve formatting of some help messages 2021-04-12 15:55:59 -04:00
Joshua Boniface 6246b8dfb3 Fix help message output on root command 2021-04-08 14:27:55 -04:00
Joshua Boniface 629cf62385 Add confirmation flag to disruptive VM operations
Also add some additional output when --restart is not selected.

Closes #118
2021-04-08 13:33:10 -04:00
Joshua Boniface dfa3432601 Add unsafe envvar/flag option
Allows another way (beyond --yes) to avoid confirming "unsafe"
operations. While there is probably nearly zero usecase for this (at
least to any sane admin), it is provided to allow maximum flexibility.
2021-04-08 12:48:38 -04:00
Joshua Boniface 62213fab99 Add description field to CLI clusters
Allow specifying a textual description of the cluster in the client for
ease of management.
2021-04-08 12:28:23 -04:00
Joshua Boniface 0bf276fd51 Update copyright year in headers 2021-03-25 17:01:55 -04:00
Joshua Boniface f4ec161aa2 Update file copyright header.
Remove the option to select a later version of the GPL.
2021-03-25 16:58:02 -04:00
Joshua Boniface 78925be090 Correct bad help string 2021-03-17 13:58:23 -04:00
Joshua Boniface 1b6613c280 Add live VNC information to domain output
Sets in the node daemon, returns via the API, and shows in the CLI,
information about the live VNC listen address and port for VNC-enabled
VMs.

Closes #115
2020-12-20 16:00:55 -05:00
Joshua Boniface 37c3b4ef80 Validate provisioner userdata with SafeLoader
Given the issues with FullLoader and its eventual deprecation, just use
SafeLoader instead. Any well-formatted Userdata document should conform.
2020-12-15 00:30:20 -05:00