Joshua Boniface
1d7acf62bf
Fix bad location of config sets
2021-10-12 17:23:04 -04:00
Joshua Boniface
c790c331a7
Also validate on failures
2021-10-12 17:11:03 -04:00
Joshua Boniface
23165482df
Bump version to 0.9.42
2021-10-12 15:25:42 -04:00
Joshua Boniface
057071a7b7
Go back to passing if exception
...
Validation already happened and the set happens again later.
2021-10-12 14:21:52 -04:00
Joshua Boniface
554fa9f412
Use current live value for bridge_mtu
...
This will ensure that upgrading without the bridge_mtu config key set
will keep things as they are.
2021-10-12 12:24:03 -04:00
Joshua Boniface
5a5f924268
Use power off in fence instead of reset
...
Use a power off (and then make the power on a requirement) during a node
fence. Removes some potential ambiguity in the power state, since we
will know for certain if it is off.
2021-10-12 11:04:27 -04:00
Joshua Boniface
cc309fc021
Validate network MTU after initial read
2021-10-12 10:53:17 -04:00
Joshua Boniface
5f783f1663
Make cluster example images clickable
2021-10-12 03:15:04 -04:00
Joshua Boniface
bc89bb5b68
Mention fencing only in run state
2021-10-12 03:05:01 -04:00
Joshua Boniface
eb233ef588
Adjust more wording and fix typos
2021-10-12 03:00:21 -04:00
Joshua Boniface
d3efb54cb4
Adjust some wording
2021-10-12 02:54:16 -04:00
Joshua Boniface
da15357c8a
Remove codeql setup
...
I don't use this for anything useful, so disable it since a run takes
ages.
2021-10-12 02:51:19 -04:00
Joshua Boniface
b6939a28c0
Fix formatting of subsection
2021-10-12 02:49:40 -04:00
Joshua Boniface
a1da479a4c
Add reference to Ansible manual
2021-10-12 02:48:47 -04:00
Joshua Boniface
ace4082820
Fix spelling errors
2021-10-12 02:47:31 -04:00
Joshua Boniface
4036af6045
Fix link to cluster architecture docs
2021-10-12 02:41:22 -04:00
Joshua Boniface
f96de97861
Adjust getting started docs
...
Update the docs with the current information on setting up a cluster,
including simplifying the Ansible configuration to use the new
create-local-repo.sh script, and simplifying some other sections.
2021-10-12 02:39:25 -04:00
Joshua Boniface
04cad46305
Default to removing build artifacts in b-a-d.sh
2021-10-11 16:41:00 -04:00
Joshua Boniface
e9dea4d2d1
Add explicit 3 second timeout to requests
2021-10-11 16:31:18 -04:00
Joshua Boniface
39fd85fcc3
Add version function support to CLI
2021-10-11 15:34:41 -04:00
Joshua Boniface
cbbab46b55
Add new configs for Ansible
2021-10-11 14:44:18 -04:00
Joshua Boniface
d1f2ce0b0a
Bump version to 0.9.41
2021-10-09 19:39:21 -04:00
Joshua Boniface
2f01edca14
Add bridge_mtu config to docs
2021-10-09 19:28:50 -04:00
Joshua Boniface
12a3a3a6a6
Adjust log type of object setup message
2021-10-09 19:23:12 -04:00
Joshua Boniface
c44732be83
Avoid duplicate runs of MTU set
...
It wasn't the validator duplicating, but the update duplicating, so
avoid that happening properly this time.
2021-10-09 19:21:47 -04:00
Joshua Boniface
a8b68e0968
Revert "Avoid duplicate runs of MTU validator"
...
This reverts commit 56021c443a
2021-10-09 19:11:42 -04:00
Joshua Boniface
e59152afee
Set all log messages to information state
...
None of these were "success" messages and thus shouldn't have been ok
state.
2021-10-09 19:09:38 -04:00
Joshua Boniface
56021c443a
Avoid duplicate runs of MTU validator
2021-10-09 19:07:41 -04:00
Joshua Boniface
ebdea165f1
Use correct isinstance instead of type
2021-10-09 19:03:31 -04:00
Joshua Boniface
fb0651fb05
Move MTU validation to function
...
Prevents code duplication and ensures validation runs when an MTU is
updated, not just on network creation.
2021-10-09 19:01:45 -04:00
Joshua Boniface
35e7e11403
Add logger message when setting MTU
2021-10-09 18:56:18 -04:00
Joshua Boniface
b7555468eb
Ensure vx_mtu is always an int()
2021-10-09 18:52:50 -04:00
Joshua Boniface
f1b4ee02ba
Fix bad header length in network list
2021-10-09 18:50:32 -04:00
Joshua Boniface
4698edc98e
Add MTU value checking and log messages
...
Ensures that if a specified MTU is more than the maximum it is set to
the maximum instead, and adds warning messages for both situations.
2021-10-09 18:48:56 -04:00
Joshua Boniface
40e7e04aad
Fix invalid schema key
...
Addresses #144
2021-10-09 18:42:33 -04:00
Joshua Boniface
7f074847c4
Add MTU support to network add/modify commands
...
Addresses #144
2021-10-09 18:06:21 -04:00
Joshua Boniface
b0b0b75605
Have VXNetworkInstance set MTU if unset
...
Makes this explicit in Zookeeper if a network is unset, post-migration
(schema version 6).
Addresses #144
2021-10-09 17:52:57 -04:00
Joshua Boniface
89f62318bd
Add MTU to network creation/modification
...
Addresses #144
2021-10-09 17:51:32 -04:00
Joshua Boniface
925141ed65
Fix migration bugs and invalid vx_mtu
...
Addresses #144
2021-10-09 17:35:10 -04:00
Joshua Boniface
f7a826bf52
Add handlers for client network MTUs
...
Refactors some of the code in VXNetworkInterface to handle MTUs in a
more streamlined fashion. Also fixes a bug whereby bridge client
networks were being explicitly given the cluster dev MTU which might not
be correct. Now adds support for this option explicitly in the configs,
and defaults to 1500 for safety (the standard Ethernet MTU).
Addresses #144
2021-10-09 17:02:27 -04:00
Joshua Boniface
e176f3b2f6
Make n-1 values clearer
2021-10-07 18:11:15 -04:00
Joshua Boniface
b339d5e641
Correct levels in TOC
2021-10-07 18:08:28 -04:00
Joshua Boniface
d476b13cc0
Correct spelling errors
2021-10-07 18:07:06 -04:00
Joshua Boniface
ce8b2c22cc
Add documentation sections on IPMI and fencing
2021-10-07 18:05:47 -04:00
Joshua Boniface
feab5d3479
Correct flawed conditional in verify_ipmi
2021-10-07 15:11:19 -04:00
Joshua Boniface
ee348593c9
Bump version to 0.9.40
2021-10-07 14:42:04 -04:00
Joshua Boniface
e403146bcf
Correct bad stop_keepalive_timer call
2021-10-07 14:41:12 -04:00
Joshua Boniface
bde684dd3a
Remove redundant wording from header
2021-10-07 12:20:04 -04:00
Joshua Boniface
992e003500
Replace headers with links in CHANGELOG.md
2021-10-07 12:17:44 -04:00
Joshua Boniface
eaeb860a83
Add missing period to changelog sentence
2021-10-07 12:10:35 -04:00
Joshua Boniface