Bump install disk sizes for 0.9.26
This commit is contained in:
parent
4ac91328a4
commit
4ddb1f2675
44
install.sh
44
install.sh
|
@ -57,8 +57,8 @@ disks="$(
|
|||
|
||||
echo "2) Please enter the disk to install the PVC base system to. This disk will be"
|
||||
echo "wiped, an LVM PV created on it, and the system installed to this LVM."
|
||||
echo "NOTE: PVC requires a disk of >16GB to be installed to. 32GB is the recommended"
|
||||
echo "minimum size, and disks larger than 64GB are not particularly useful."
|
||||
echo "NOTE: PVC requires a disk of at least 64GB to be installed to. 100GB is the"
|
||||
echo "recommended minimum size."
|
||||
echo "NOTE: This disk should generally be a RAID-1 volume configured in hardware for"
|
||||
echo "maximum redundancy and resiliency."
|
||||
echo
|
||||
|
@ -260,6 +260,7 @@ cleanup() {
|
|||
umount ${target}/dev/pts >&2
|
||||
umount ${target}/dev >&2
|
||||
umount ${target}/var/lib/ceph >&2
|
||||
umount ${target}/var/lib/zookeeper >&2
|
||||
umount ${target}/boot/efi >&2
|
||||
umount ${target}/boot >&2
|
||||
umount ${target} >&2
|
||||
|
@ -272,26 +273,22 @@ trap cleanup EXIT
|
|||
|
||||
echo -n "Determining block device and partition sizing... "
|
||||
blockdev_size="$(( $( blockdev --getsize64 ${target_disk} ) / 1024 / 1024 / 1024 - 1))"
|
||||
if [[ ${blockdev_size} -ge 58 ]]; then
|
||||
# Sufficiently large system disk (>=64GB), use large partitions
|
||||
if [[ ${blockdev_size} -ge 100 ]]; then
|
||||
# Optimal sized system disk (>=100GB), use large partitions
|
||||
size_root_lv="32"
|
||||
size_ceph_lv="4"
|
||||
size_ceph_lv="8"
|
||||
size_zookeeper_lv="32"
|
||||
size_swap_lv="16"
|
||||
echo "found large disk, using partition sizes 32/4/16."
|
||||
elif [[ ${blockdev_size} -ge 28 ]]; then
|
||||
# Relatively large disk (>=32GB), use small partitions
|
||||
echo "found optimal sized disk, using partition sizes 32/8/32/16."
|
||||
elif [[ ${blockdev_size} -ge 62 ]]; then
|
||||
# Minimum sized disk (>=64GB), use small partitions
|
||||
size_root_lv="16"
|
||||
size_ceph_lv="2"
|
||||
size_swap_lv="8"
|
||||
echo "found medium disk, using partition sizes 16/2/8."
|
||||
elif [[ ${blockdev_size} -ge 13 ]]; then
|
||||
# Small disk (>=16GB), use very small partitions
|
||||
size_root_lv="8"
|
||||
size_ceph_lv="2"
|
||||
size_swap_lv="2"
|
||||
echo "found small disk, using partition sizes 8/2/2."
|
||||
size_ceph_lv="4"
|
||||
size_zookeeper_lv="16"
|
||||
size_swap_lv="16"
|
||||
echo "found minimum sized disk, using partition sizes 16/4/16/16."
|
||||
else
|
||||
# Extremely small disk, (<16GB) - bail out, this is too small
|
||||
# Extremely small disk, (<64GB) - bail out, this is too small
|
||||
echo
|
||||
echo "FAILURE - The specified disk is too small (<16GB). PVC must be installed on a disk of >16GB."
|
||||
read
|
||||
|
@ -337,6 +334,13 @@ echo -n "Creating filesystem on ceph logical volume (ext4)... "
|
|||
mkfs.ext4 /dev/vgx/ceph >&2
|
||||
echo "done."
|
||||
|
||||
echo -n "Creating zookeeper logical volume (${size_zookeeper_lv}GB)... "
|
||||
yes | lvcreate -L ${size_zookeeper_lv}G -n zookeeper vgx >&2
|
||||
echo "done."
|
||||
echo -n "Creating filesystem on zookeeper logical volume (ext4)... "
|
||||
mkfs.ext4 /dev/vgx/zookeeper >&2
|
||||
echo "done."
|
||||
|
||||
echo -n "Creating swap logical volume (${size_swap_lv}GB)... "
|
||||
lvcreate -L ${size_swap_lv}G -n swap vgx >&2
|
||||
echo "done."
|
||||
|
@ -364,6 +368,9 @@ mount ${target_disk}1 ${target}/boot/efi >&2
|
|||
mkdir -p ${target}/var/lib/ceph >&2
|
||||
chattr +i ${target}/var/lib/ceph >&2
|
||||
mount /dev/vgx/ceph ${target}/var/lib/ceph >&2
|
||||
mkdir -p ${target}/var/lib/zookeeper >&2
|
||||
chattr +i ${target}/var/lib/zookeeper >&2
|
||||
mount /dev/vgx/zookeeper ${target}/var/lib/zookeeper >&2
|
||||
mkdir -p ${target}/tmp >&2
|
||||
chattr +i ${target}/tmp >&2
|
||||
mount -t tmpfs tmpfs ${target}/tmp >&2
|
||||
|
@ -395,6 +402,7 @@ done
|
|||
echo -n "Adding fstab entries... "
|
||||
echo "/dev/mapper/vgx-root / ext4 errors=remount-ro 0 1" | tee -a ${target}/etc/fstab >&2
|
||||
echo "/dev/mapper/vgx-ceph /var/lib/ceph ext4 errors=remount-ro 0 2" | tee -a ${target}/etc/fstab >&2
|
||||
echo "/dev/mapper/vgx-zookeeper /var/lib/zookeeper ext4 errors=remount-ro 0 2" | tee -a ${target}/etc/fstab >&2
|
||||
echo "/dev/mapper/vgx-swap none swap sw 0 0" | tee -a ${target}/etc/fstab >&2
|
||||
echo "${bypath_disk}-part2 /boot ext2 defaults 0 2" | tee -a ${target}/etc/fstab >&2
|
||||
echo "${bypath_disk}-part1 /boot/efi vfat umask=0077 0 2" | tee -a ${target}/etc/fstab >&2
|
||||
|
|
Loading…
Reference in New Issue