joshuaboniface/supersensor2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add parts list and clean up wording

Browse Source
This commit is contained in:
Joshua Boniface 2024-04-23 03:31:08 -04:00
parent 809a5f9b38
commit e1f864f82c
1 changed files with 15 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
README.md
View File

@ -1,7 +1,7 @@
# SuperSensor
SuperSensor is an all-in-one voice, motion, presence, temperature/humidity/
pressure, light, and BLE sensor, built on an ESP32 with ESPHome, and inspired
pressure, and light sensor, built on an ESP32 with ESPHome, and inspired
heavily by the EverythingSmartHome Everything Presence One sensor and the
HomeAssistant "$13 Voice Assistant" project.
@ -9,10 +9,11 @@ Use SuperSensors around your house to provide HomeAssistant Voice Assist
interfaces with wake word detection, as well as other sensor detection options
as you want them.
Assist feedback is provided by a single common-cathode RGB LED. No speakers
or annoying TTS feedback here! With the optional 3D Printed case and a clear
diffuser cover, this LED can be turned into a sleek light bar on the bottom
of the unit for quick and easy confirmation of voice actions.
Assist feedback is provided by a pair of common-cathode RGB LED. No speakers
or annoying TTS feedback here! With an optional 3D Printed case and a clear
diffuser cover, the LEDs can be turned into a sleek light bar on the bottom
of the unit for quick and easy confirmation of voice actions, or just use
it bare if you like the "PCB on a wall" aesthetic.
To Use:
@ -33,15 +34,15 @@ Note: Once programmed, the output LED will flash continuously until connected
## Parts List
* 1x ESP32 devkit (V4 38-pin, slim)
* 2x Common-cathod RGB LED
* 1x Resistor for the common-cathod RGB LED @ 3.3v input (~33-1000Ω, depending on desired brightness and LED)
* 1x INMP441 MEMS microphone
* 1x BME680 temperature/humidity/pressure/gase sensor (3.3v models); BME280 or BMP280 can be subsistuted but with reduced fuctionality (comment/uncomment the appropriate blocks as needed)
* 1x TSL2591 light sensor
* 1x HLK-LD2410C mmWave radar sensor
* 1x SR602 PIR sensor
* 1x SuperSensor PCB board (see "board/supersensor.dxf" or "board/supersensor.easyeda.json"
* 1x ESP32 devkit (V4 38-pin, slim) [AliExpress (HW-395)](https://www.aliexpress.com/item/1005006019875837.html)
* 1x INMP441 MEMS microphone [Amazon search](https://www.amazon.ca/s?k=INMP441)
* 1x BME680 temperature/humidity/pressure/gase sensor (3.3v models); BME280 or BMP280 can be subsistuted but with reduced fuctionality (comment/uncomment the appropriate blocks as needed) [AliExpress](https://www.aliexpress.com/item/4000818429803.html)
* 1x TSL2591 light sensor [AliExpress](https://www.aliexpress.com/item/1005005514391429.html)
* 1x HLK-LD2410C-P mmWave radar sensor [AliExpress (LD2410C-P)](https://www.aliexpress.com/item/1005006000579211.html)
* 1x SR602 PIR sensor [AliExpress](https://www.aliexpress.com/item/1005001572550300.html)
* 2x Common-cathod RGB LEDs [Amazon search](https://www.amazon.ca/s?k=5mm+RGB+LED+common+cathode)
* 1x Resistor for the common-cathod RGB LED @ 3.3v input (~33-1000Ω, depending on desired brightness and LEDs)
* 1x SuperSensor PCB board (see "board/supersensor.dxf" or "board/supersensor.easyeda.json")
* 1x 3D Printed case [Optional]
* 1x 3D Printed diffuser cover [Optional]