Switch to BME680 BSEC version

The IAQ is useless out of the default, so switch to the Bosch library,
even if it's proprietary.

Requires switching back to Arduino instead of ESP-IDF but so far through
many tests this hasn't been a big deal.

supersensor.yaml

@@ -44,17 +44,6 @@ dashboard_import:
 
 esp32:
   board: esp32dev
-  framework:
-    type: esp-idf
-    sdkconfig_options:
-      CONFIG_ESP32_DEFAULT_CPU_FREQ_240: "y"
-      CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ: "240"
-      CONFIG_ESP32_DATA_CACHE_64KB: "y"
-      CONFIG_ESP32_DATA_CACHE_LINE_64B: "y"
-      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
-      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ: "240"
-      CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
-      CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
 
 globals:
   - id: pir_hold_time
@@ -367,6 +356,13 @@ output:
     id: rgb_b
     pin: GPIO25
 
+bme680_bsec:
+  address: 0x77
+  id: bme680_sensor
+  sample_rate: lp
+  state_save_interval: 1h
+  iaq_mode: static
+
 ld2410:
   id: ld2410_radar
   uart_id: ld2410_uart
@@ -443,7 +439,8 @@ binary_sensor:
       name: "LD2410C Still Target"
 
 sensor:
-  - platform: bme680
+  - platform: bme680_bsec
+    bme680_bsec_id: bme680_sensor
     temperature:
       name: "BME680 Temperature"
       id: bme680_temperature
@@ -453,26 +450,23 @@ sensor:
     humidity:
       name: "BME680 Relative Humidity"
       id: bme680_humidity
+    iaq:
+      name: "BME680 IAQ"
+      id: bme680_iaq
+    co2_equivalent:
+      name: "BME680 CO2 Equivalent"
+    breath_voc_equivalent:
+      name: "BME680 Breath VOC Equivalent"
     gas_resistance:
       name: "BME680 Gas Resistance"
       id: bme680_gas_resistance
       internal: yes
-    address: 0x77
-    update_interval: 5s
 
   - platform: absolute_humidity
     name: "BME680 Absolute Humidity"
     temperature: bme680_temperature
     humidity: bme680_humidity
 
-  - platform: template
-    name: "BME680 Indoor Air Quality"
-    id: bme680_iaq
-    icon: "mdi:gauge"
-    # caulculation: comp_gas = log(R_gas[ohm]) + 0.04 log(Ohm)/%rh * hum[%rh]
-    lambda: |-
-      return float(log(id(bme680_gas_resistance).state) + 0.04 *  id(bme680_humidity).state);
-
   - platform: tsl2591
     address: 0x29
     update_interval: 1s
@@ -553,33 +547,40 @@ sensor:
     entity_category: diagnostic
 
 text_sensor:
+  - platform: bme680_bsec
+    bme680_bsec_id: bme680_sensor
+    iaq_accuracy:
+      name: "BME680 IAQ Accuracy"
+
   - platform: template
     name: "BME680 IAQ Classification"
-    icon: "mdi:checkbox-marked-circle-outline"
+    icon: "mdi:air-filter"
+    update_interval: 15s
     lambda: |-
-      if (int(id(bme680_iaq).state) <= 50) {
-        return {"Excellent"};
+      int iaq = int(id(bme680_iaq).state);
+      if (iaq <= 50) {
+        return {"Excellent (" + to_string(iaq) + ")"};
       }
-      else if (int(id(bme680_iaq).state) <= 100) {
-        return {"Good"};
+      else if (iaq <= 100) {
+        return {"Good (" + to_string(iaq) + ")"};
       }
-      else if (int(id(bme680_iaq).state) <= 150) {
-        return {"Lightly polluted"};
+      else if (iaq <= 150) {
+        return {"Fair (" + to_string(iaq) + ")"};
       }
-      else if (int(id(bme680_iaq).state) <= 200) {
-        return {"Moderately polluted"};
+      else if (iaq <= 200) {
+        return {"Moderate (" + to_string(iaq) + ")"};
       }
-      else if (int(id(bme680_iaq).state) <= 250) {
-        return {"Heavily polluted"};
+      else if (iaq <= 250) {
+        return {"Bad (" + to_string(iaq) + ")"};
       }
-      else if (int(id(bme680_iaq).state) <= 350) {
-        return {"Severely polluted"};
+      else if (iaq <= 350) {
+        return {"Very Bad (" + to_string(iaq) + ")"};
       }
-      else if (int(id(bme680_iaq).state) <= 500) {
-        return {"Extremely polluted"};
+      else if (iaq <= 500) {
+        return {"Terrible (" + to_string(iaq) + ")"};
       }
       else {
-        return {"Unknown"};
+        return {"Unknown (" + to_string(iaq) + ")"};
       }
 
   - platform: wifi_info