Add full presence mode sensor and light presence
This commit is contained in:
parent
8c1ce0560d
commit
7e13139546
359
supersensor.yaml
359
supersensor.yaml
@ -20,10 +20,6 @@
|
||||
#
|
||||
###############################################################################
|
||||
|
||||
substitutions:
|
||||
# How long a PIR activation should be held for
|
||||
pir_holdtime: "15s"
|
||||
|
||||
esphome:
|
||||
name: supersensor
|
||||
name_add_mac_suffix: true
|
||||
@ -34,6 +30,10 @@ esphome:
|
||||
on_boot:
|
||||
- priority: 600
|
||||
then:
|
||||
- lambda: |-
|
||||
id(supersensor_occupancy).publish_state(false);
|
||||
id(pir_presence).publish_state(false);
|
||||
id(light_presence).publish_state(false);
|
||||
- light.turn_on:
|
||||
id: output_led
|
||||
effect: flash
|
||||
@ -59,18 +59,154 @@ esp32:
|
||||
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
|
||||
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
|
||||
|
||||
globals:
|
||||
- id: pir_hold_time
|
||||
type: int
|
||||
restore_value: yes
|
||||
initial_value: "15"
|
||||
|
||||
- id: light_presence_threshold
|
||||
type: int
|
||||
restore_value: yes
|
||||
initial_value: "30"
|
||||
|
||||
- id: occupancy_detect_mode
|
||||
type: int
|
||||
restore_value: yes
|
||||
initial_value: "0"
|
||||
|
||||
- id: occupancy_clear_mode
|
||||
type: int
|
||||
restore_value: yes
|
||||
initial_value: "0"
|
||||
|
||||
script:
|
||||
- id: pir_handler
|
||||
then:
|
||||
- lambda: |-
|
||||
id(pir_motion).publish_state(true);
|
||||
id(pir_presence).publish_state(true);
|
||||
- while:
|
||||
condition:
|
||||
binary_sensor.is_on: pir_gpio
|
||||
then:
|
||||
- delay: ${pir_holdtime}
|
||||
- delay: !lambda 'return(id(pir_hold_time) * 1000);'
|
||||
- lambda: |-
|
||||
id(pir_motion).publish_state(false);
|
||||
id(pir_presence).publish_state(false);
|
||||
|
||||
- id: light_handler
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(tsl2591_lux).state >= id(light_presence_threshold)) {
|
||||
id(light_presence).publish_state(true);
|
||||
} else {
|
||||
id(light_presence).publish_state(false);
|
||||
}
|
||||
|
||||
- id: occupancy_detect_handler
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("occupancy_detect_handler", "Occupancy detect handler triggered");
|
||||
|
||||
// Get the current values of our presence sensors
|
||||
bool pir = id(pir_presence).state;
|
||||
bool radar = id(radar_presence).state;
|
||||
bool light = id(light_presence).state;
|
||||
|
||||
// Determine if PIR counts (2nd bit of presence_type)
|
||||
int pir_counts = (id(occupancy_detect_mode) & ( 1 << 2 )) >> 2;
|
||||
|
||||
// Determine if Radar counts (1st bit of presence_type)
|
||||
int radar_counts = (id(occupancy_detect_mode) & ( 1 << 1 )) >> 1;
|
||||
|
||||
// Determine if Light counts (0th bit of presence_type)
|
||||
int light_counts = (id(occupancy_detect_mode) & ( 1 << 0 )) >> 0;
|
||||
|
||||
// Determine our results
|
||||
if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of pir & radar & light
|
||||
ESP_LOGD("occupancy_detect_handler", "PIR & Radar & Light: %i", pir & radar & light);
|
||||
id(supersensor_occupancy).publish_state(pir & radar & light);
|
||||
} else if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of pir & radar
|
||||
ESP_LOGD("occupancy_detect_handler", "PIR & Radar: %i", pir & radar);
|
||||
id(supersensor_occupancy).publish_state(pir & radar);
|
||||
} else if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of pir & light
|
||||
ESP_LOGD("occupancy_detect_handler", "PIR & Light: %i", pir & light);
|
||||
id(supersensor_occupancy).publish_state(pir & light);
|
||||
} else if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of radar & light
|
||||
ESP_LOGD("occupancy_detect_handler", "Radar & Light: %i", radar & light);
|
||||
id(supersensor_occupancy).publish_state(radar & light);
|
||||
} else if (pir_counts) {
|
||||
// Only pir
|
||||
ESP_LOGD("occupancy_detect_handler", "PIR: %i", pir);
|
||||
id(supersensor_occupancy).publish_state(pir);
|
||||
} else if (radar_counts) {
|
||||
// Only radar
|
||||
ESP_LOGD("occupancy_detect_handler", "Radar: %i", radar);
|
||||
id(supersensor_occupancy).publish_state(radar);
|
||||
} else if (light_counts) {
|
||||
// Only light
|
||||
ESP_LOGD("occupancy_detect_handler", "Light: %i", light);
|
||||
id(supersensor_occupancy).publish_state(light);
|
||||
} else {
|
||||
ESP_LOGD("occupancy_detect_handler", "None");
|
||||
id(supersensor_occupancy).publish_state(false);
|
||||
}
|
||||
|
||||
- id: occupancy_clear_handler
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("occupancy_clear_handler", "Occupancy clear handler triggered");
|
||||
|
||||
// Get the current values of our presence sensors
|
||||
bool pir = id(pir_presence).state;
|
||||
bool radar = id(radar_presence).state;
|
||||
bool light = id(light_presence).state;
|
||||
|
||||
// Determine if PIR counts (2nd bit of presence_type)
|
||||
int pir_counts = (id(occupancy_clear_mode) & ( 1 << 2 )) >> 2;
|
||||
|
||||
// Determine if Radar counts (1st bit of presence_type)
|
||||
int radar_counts = (id(occupancy_clear_mode) & ( 1 << 1 )) >> 1;
|
||||
|
||||
// Determine if Light counts (0th bit of presence_type)
|
||||
int light_counts = (id(occupancy_clear_mode) & ( 1 << 0 )) >> 0;
|
||||
|
||||
// Determine our results
|
||||
if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of pir & radar & light
|
||||
ESP_LOGD("occupancy_clear_handler", "PIR & Radar & Light: %i", pir & radar & light);
|
||||
id(supersensor_occupancy).publish_state(pir & radar & light);
|
||||
} else if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of pir & radar
|
||||
ESP_LOGD("occupancy_clear_handler", "PIR & Radar: %i", pir & radar);
|
||||
id(supersensor_occupancy).publish_state(pir & radar);
|
||||
} else if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of pir & light
|
||||
ESP_LOGD("occupancy_clear_handler", "PIR & Light: %i", pir & light);
|
||||
id(supersensor_occupancy).publish_state(pir & light);
|
||||
} else if (pir_counts & radar_counts & light_counts) {
|
||||
// Logical AND of radar & light
|
||||
ESP_LOGD("occupancy_clear_handler", "Radar & Light: %i", radar & light);
|
||||
id(supersensor_occupancy).publish_state(radar & light);
|
||||
} else if (pir_counts) {
|
||||
// Only pir
|
||||
ESP_LOGD("occupancy_clear_handler", "PIR: %i", pir);
|
||||
id(supersensor_occupancy).publish_state(pir);
|
||||
} else if (radar_counts) {
|
||||
// Only radar
|
||||
ESP_LOGD("occupancy_clear_handler", "Radar: %i", radar);
|
||||
id(supersensor_occupancy).publish_state(radar);
|
||||
} else if (light_counts) {
|
||||
// Only light
|
||||
ESP_LOGD("occupancy_clear_handler", "Light: %i", light);
|
||||
id(supersensor_occupancy).publish_state(light);
|
||||
} else {
|
||||
ESP_LOGD("occupancy_clear_handler", "None");
|
||||
id(supersensor_occupancy).publish_state(false);
|
||||
}
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
@ -260,6 +396,11 @@ ld2410:
|
||||
# g8_still_threshold: 81
|
||||
|
||||
binary_sensor:
|
||||
- platform: template
|
||||
name: "SuperSensor Occupancy"
|
||||
id: supersensor_occupancy
|
||||
device_class: occupancy
|
||||
|
||||
- platform: gpio
|
||||
name: "PIR GPIO"
|
||||
id: pir_gpio
|
||||
@ -271,14 +412,32 @@ binary_sensor:
|
||||
- script.execute: pir_handler
|
||||
|
||||
- platform: template
|
||||
name: "PIR Motion"
|
||||
id: pir_motion
|
||||
name: "PIR Presence"
|
||||
id: pir_presence
|
||||
device_class: motion
|
||||
on_press:
|
||||
- script.execute: occupancy_detect_handler
|
||||
on_release:
|
||||
- script.execute: occupancy_clear_handler
|
||||
|
||||
- platform: template
|
||||
name: "Light Presence"
|
||||
id: light_presence
|
||||
device_class: motion
|
||||
on_press:
|
||||
- script.execute: occupancy_detect_handler
|
||||
on_release:
|
||||
- script.execute: occupancy_clear_handler
|
||||
|
||||
- platform: ld2410
|
||||
ld2410_id: ld2410_radar
|
||||
has_target:
|
||||
name: "LD2410C Presence"
|
||||
id: radar_presence
|
||||
on_press:
|
||||
- script.execute: occupancy_detect_handler
|
||||
on_release:
|
||||
- script.execute: occupancy_clear_handler
|
||||
has_moving_target:
|
||||
name: "LD2410C Moving Target"
|
||||
has_still_target:
|
||||
@ -305,8 +464,9 @@ sensor:
|
||||
|
||||
- platform: tsl2591
|
||||
address: 0x29
|
||||
update_interval: 5s
|
||||
update_interval: 1s
|
||||
integration_time: 600ms
|
||||
power_save_mode: no
|
||||
gain: medium
|
||||
device_factor: 53
|
||||
glass_attenuation_factor: 7.7
|
||||
@ -317,9 +477,11 @@ sensor:
|
||||
full_spectrum:
|
||||
name: "TSL2591 Full Spectrum Light"
|
||||
calculated_lux:
|
||||
id: i_lux
|
||||
id: tsl2591_lux
|
||||
name: "TSL2591 Illumination"
|
||||
unit_of_measurement: Lux
|
||||
on_value:
|
||||
- script.execute: light_handler
|
||||
actual_gain:
|
||||
id: "actual_gain"
|
||||
name: "TSL2591 Gain"
|
||||
@ -346,7 +508,7 @@ sensor:
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: wifi_signal
|
||||
name: "ESP32 WiFi RSSI"
|
||||
name: "WiFi RSSI"
|
||||
icon: mdi:wifi-strength-2
|
||||
update_interval: 5s
|
||||
entity_category: diagnostic
|
||||
@ -382,17 +544,13 @@ sensor:
|
||||
text_sensor:
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: "ESP32 IP Address"
|
||||
name: "WiFi IP Address"
|
||||
ssid:
|
||||
name: "ESP32 Connected SSID"
|
||||
name: "WiFi SSID"
|
||||
bssid:
|
||||
name: "ESP32 Connected BSSID"
|
||||
name: "WiFi BSSID"
|
||||
mac_address:
|
||||
name: "ESP32 WiFi MAC Address"
|
||||
scan_results:
|
||||
name: "ESP32 Latest Scan Results"
|
||||
dns_address:
|
||||
name: "ESP32 DNS Address"
|
||||
name: "WiFi MAC Address"
|
||||
|
||||
- platform: ld2410
|
||||
version:
|
||||
@ -438,10 +596,46 @@ switch:
|
||||
- platform: ld2410
|
||||
engineering_mode:
|
||||
name: "LD2410C Engineering Mode"
|
||||
entity_category: diagnostic
|
||||
bluetooth:
|
||||
name: "LD2410C Bluetooth"
|
||||
entity_category: diagnostic
|
||||
|
||||
number:
|
||||
# PIR Hold Time:
|
||||
# The number of seconds after motion detection for the PIR sensor to remain held on
|
||||
- platform: template
|
||||
name: "PIR Hold Time"
|
||||
id: pir_hold_time_setter
|
||||
optimistic: true
|
||||
min_value: 0
|
||||
max_value: 60
|
||||
step: 5
|
||||
restore_value: true
|
||||
initial_value: 15
|
||||
on_value:
|
||||
then:
|
||||
- globals.set:
|
||||
id: pir_hold_time
|
||||
value: !lambda 'return int(x);'
|
||||
|
||||
# Light Presence Threshold
|
||||
# The minimum Lux value to consider presence based on the ambient light level
|
||||
- platform: template
|
||||
name: "Light Presence Threshold"
|
||||
id: light_presence_threshold_setter
|
||||
optimistic: true
|
||||
min_value: 0
|
||||
max_value: 500
|
||||
step: 5
|
||||
restore_value: true
|
||||
initial_value: 30
|
||||
on_value:
|
||||
then:
|
||||
- globals.set:
|
||||
id: light_presence_threshold
|
||||
value: !lambda 'return int(x);'
|
||||
|
||||
- platform: ld2410
|
||||
timeout:
|
||||
name: "LD2410C Timeout"
|
||||
@ -498,6 +692,131 @@ number:
|
||||
name: "LD2410C Gate8 Still Threshold"
|
||||
|
||||
select:
|
||||
|
||||
# Occupancy Detect Mode:
|
||||
# This selector defines the detection mode for the integrated occupancy sensor. Depending on the
|
||||
# selected option, only the given sensor(s) will be used to judge when occupancy begins (i.e.
|
||||
# when the given sensor(s) detect, occupancy detects).
|
||||
# * PIR + Radar + Light:
|
||||
# All 3 sensors reporting detection simultaneously will begin occupancy
|
||||
# * PIR + Radar
|
||||
# Both PIR and Radar sensors reporting detection simultaneously will begin occupancy
|
||||
# * PIR + Light
|
||||
# Both PIR and Light sensors reporting detection simultaneously will begin occupancy
|
||||
# * Radar + Light
|
||||
# Both Radar and Light sensors reporting detection simultaneously will begin occupancy
|
||||
# * PIR Only
|
||||
# PIR sensor reporting detection will begin occupancy
|
||||
# * Radar Only
|
||||
# Radar sensor reporting detection will begin occupancy
|
||||
# * Light Only
|
||||
# Light sensor reporting detection will begin occupancy
|
||||
# * None
|
||||
# No sensors will begin occupancy and the integrated occupancy functionality is disabled
|
||||
# Values are reported as integers using bitwise logic:
|
||||
# Bit 2: PIR
|
||||
# Bit 1: Radar
|
||||
# Bit 0: Light
|
||||
- platform: template
|
||||
name: "Occupancy Detect Mode"
|
||||
id: occupancy_detect_mode_setter
|
||||
options:
|
||||
- "PIR + Radar + Light" # 111 = 7
|
||||
- "PIR + Radar" # 110 = 6
|
||||
- "PIR + Light" # 101 = 5
|
||||
- "Radar + Light" # 011 = 3
|
||||
- "PIR Only" # 100 = 4
|
||||
- "Radar Only" # 010 = 2
|
||||
- "Light Only" # 001 = 1
|
||||
- "None" # 000 = 0
|
||||
initial_option: "None"
|
||||
optimistic: yes
|
||||
restore_value: yes
|
||||
set_action:
|
||||
- globals.set:
|
||||
id: occupancy_detect_mode
|
||||
value: !lambda |-
|
||||
ESP_LOGD("occupancy_detect_mode_setter", x.c_str());
|
||||
if (x == "PIR + Radar + Light") {
|
||||
return 7;
|
||||
} else if (x == "PIR + Radar") {
|
||||
return 6;
|
||||
} else if (x == "PIR + Light") {
|
||||
return 5;
|
||||
} else if (x == "Radar + Light") {
|
||||
return 3;
|
||||
} else if (x == "PIR Only") {
|
||||
return 4;
|
||||
} else if (x == "Radar Only") {
|
||||
return 2;
|
||||
} else if (x == "Light Only") {
|
||||
return 1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
|
||||
# Occupancy Clear Mode:
|
||||
# This selector defines the clear mode for the integrated occupancy sensor. Depending on the
|
||||
# selected option, only the given sensor(s) will be used to judge when occupancy ends (i.e.
|
||||
# when the given sensor(s) clear, occupancy clears).
|
||||
# * PIR + Radar + Light:
|
||||
# Any of the 3 sensors clearing will end occupancy
|
||||
# * PIR + Radar:
|
||||
# Either of the PIR or Radar sensors clearing will end occupancy
|
||||
# * PIR + Light:
|
||||
# Either of the PIR or Light sensors clearing will end occupancy
|
||||
# * Radar + Light:
|
||||
# Either of the Radar or Light sensors clearing will end occupancy
|
||||
# * PIR Only
|
||||
# PIR sensor clearing will end occupancy
|
||||
# * Radar Only
|
||||
# Radar sensor clearing will end occupancy
|
||||
# * Light Only
|
||||
# Light sensor clearing will end occupancy
|
||||
# * None
|
||||
# No sensors will end occupancy; state will persist indefinitely once triggered
|
||||
# Values are reported as integers using bitwise logic:
|
||||
# Bit 0: PIR
|
||||
# Bit 1: Radar
|
||||
# Bit 2: Light
|
||||
- platform: template
|
||||
name: "Occupancy Clear Mode"
|
||||
id: occupancy_clear_mode_setter
|
||||
options:
|
||||
- "PIR + Radar + Light" # 111 = 7
|
||||
- "PIR + Radar" # 110 = 6
|
||||
- "PIR + Light" # 101 = 5
|
||||
- "Radar + Light" # 011 = 3
|
||||
- "PIR Only" # 100 = 4
|
||||
- "Radar Only" # 010 = 2
|
||||
- "Light Only" # 001 = 1
|
||||
- "None" # 000 = 0
|
||||
initial_option: "None"
|
||||
optimistic: yes
|
||||
restore_value: yes
|
||||
set_action:
|
||||
- globals.set:
|
||||
id: occupancy_clear_mode
|
||||
value: !lambda |-
|
||||
ESP_LOGD("occupancy_detect_mode_setter", x.c_str());
|
||||
if (x == "PIR + Radar + Light") {
|
||||
return 7;
|
||||
} else if (x == "PIR + Radar") {
|
||||
return 6;
|
||||
} else if (x == "PIR + Light") {
|
||||
return 5;
|
||||
} else if (x == "Radar + Light") {
|
||||
return 3;
|
||||
} else if (x == "PIR Only") {
|
||||
return 4;
|
||||
} else if (x == "Radar Only") {
|
||||
return 2;
|
||||
} else if (x == "Light Only") {
|
||||
return 1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
|
||||
- platform: ld2410
|
||||
distance_resolution:
|
||||
name: "LD2410C Distance Resolution"
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user