Commit Graph

590 Commits

Author SHA1 Message Date
Joshua Boniface 3449069e3d Bump version to 0.9.38 2021-10-03 22:32:41 -04:00
Joshua Boniface 19ac1e17c3 Bump version to 0.9.37 2021-09-30 02:08:14 -04:00
Joshua Boniface 3b41759262 Add timeouts to queue gets and adjust
Ensure that all keepalive timeouts are set (prevent the queue.get()
actions from blocking forever) and set the thread timeouts to line up as
well. Everything here is thus limited to keepalive_interval seconds
(default 5s) to keep it uniform.
2021-09-27 16:10:27 -04:00
Joshua Boniface e514eed414 Re-add success log output during migration 2021-09-27 11:50:55 -04:00
Joshua Boniface b81e70ec18 Fix missing character in log message 2021-09-27 00:49:43 -04:00
Joshua Boniface c2a473ed8b Simplify VM migration down to 3 steps
Remove two superfluous synchronization steps which are not needed here,
since the exclusive lock handles that situation anyways.

Still does not fix the weird flush->unflush lock timeout bug, but is
better worked-around now due to the cancelling of the other wait freeing
this up and continuing.
2021-09-27 00:03:20 -04:00
Joshua Boniface 5355f6ff48 Work around synchronization lock issues
Make the block on stage C only wait for 900 seconds (15 minutes) to
prevent indefinite blocking.

The issue comes if a VM is being received, and the current unflush is
cancelled for a flush. When this happens, this lock acquisition seems to
block for no obvious reason, and no other changes seem to affect it.
This is certainly some sort of locking bug within Kazoo but I can't
diagnose it as-is. Leave a TODO to look into this again in the future.
2021-09-26 23:26:21 -04:00
Joshua Boniface bf7823deb5 Improve log messages during VM migration 2021-09-26 23:15:38 -04:00
Joshua Boniface 8ba371723e Use event to non-block wait and fix inf wait 2021-09-26 22:55:39 -04:00
Joshua Boniface e10ac52116 Track status of VM state thread 2021-09-26 22:55:21 -04:00
Joshua Boniface 341073521b Simplify locking process for VM migration
Rather than using a cumbersome and overly complex ping-pong of read and
write locks, instead move to a much simpler process using exclusive
locks.

Describing the process in ASCII or narrative is cumbersome, but the
process ping-pongs via a set of exclusive locks and wait timers, so that
the two sides are able to synchronize via blocking the exclusive lock.
The end result is a much more streamlined migration (takes about half
the time all things considered) which should be less error-prone.
2021-09-26 22:08:07 -04:00
Joshua Boniface 16c38da5ef Fix failure to connect to libvirt in keepalive
This should be caught and abort the thread rather than failing and
holding up keepalives.
2021-09-26 20:42:01 -04:00
Joshua Boniface c8134d3a1c Fix several bugs in fence handling
1. Output from ipmitool was not being stripped, and stray newlines were
throwing off the comparisons. Fixes this.

2. Several stages were lacking meaningful messages. Adds these in so the
output is more clear about what is going on.

3. Reduce the sleep time after a fence to just 1x the
keepalive_interval, rather than 2x, because this seemed like excessively
long even for slow IPMI interfaces, especially since we're checking the
power state now anyways.

4. Set the node daemon state to an explicit 'fenced' state after a
successful fence to indicate to users that the node was indeed fenced
successfully and not still 'dead'.
2021-09-26 20:07:30 -04:00
Joshua Boniface 9f41373324 Ensure pvc-flush is after network-online 2021-09-26 17:40:42 -04:00
Joshua Boniface 8e62d5b30b Fix typo in log message 2021-09-26 03:35:30 -04:00
Joshua Boniface 7df5b8e52e Fix typo in sgdisk command options 2021-09-26 00:59:05 -04:00
Joshua Boniface 6f96219023 Use re.search instead of re.match
Required since we're not matching the start of the string.
2021-09-26 00:55:29 -04:00
Joshua Boniface 51967e164b Raise basic exceptions in CephInstance
Avoids no exception to reraise errors on failures.
2021-09-26 00:50:10 -04:00
Joshua Boniface 7a3a44d47c Fix OSD creation for partition paths and fix gdisk
The previous implementation did not work with /dev/nvme devices or any
/dev/disk/by-* devices due to some logical failures in the partition
naming scheme, so fix these, and be explicit about what is supported in
the PVC CLI command output.

The 'echo | gdisk' implementation of partition creation also did not
work due to limitations of subprocess.run; instead, use sgdisk which
allows these commands to be written out explicitly and is included in
the same package as gdisk.
2021-09-26 00:12:28 -04:00
Joshua Boniface 44491dd988 Add support for configurable OSD DB ratios
The default of 0.05 (5%) is likely ideal in the initial implementation,
but allow this to be set explicitly for maximum flexibility in
space-constrained or performance-critical use-cases.
2021-09-24 01:06:39 -04:00
Joshua Boniface eba142f470 Bump version to 0.9.36 2021-09-23 14:01:38 -04:00
Joshua Boniface 6cef68d157 Add separate OSD DB device support
Adds in three parts:

1. Create an API endpoint to create OSD DB volume groups on a device.
Passed through to the node via the same command pipeline as
creating/removing OSDs, and creates a volume group with a fixed name
(osd-db).

2. Adds API support for specifying whether or not to use this DB volume
group when creating a new OSD via the "ext_db" flag. Naming and sizing
is fixed for simplicity and based on Ceph recommendations (5% of OSD
size). The Zookeeper schema tracks the block device to use during
removal.

3. Adds CLI support for the new and modified API endpoints, as well as
displaying the block device and DB block device in the OSD list.

While I debated supporting adding a DB device to an existing OSD, in
practice this ended up being a very complex operation involving stopping
the OSD and setting some options, so this is not supported; this can be
specified during OSD creation only.

Closes #142
2021-09-23 13:59:49 -04:00
Joshua Boniface e8caf3369e Move console watcher stop try up
Could cause an exception if d_domain is not defined yet.
2021-09-22 16:02:04 -04:00
Joshua Boniface 3e3776a25b Bump version to 0.9.35 2021-09-13 02:20:46 -04:00
Joshua Boniface 1b6d10e03a Handle VM disk/network stats gathering exceptions 2021-09-12 19:41:07 -04:00
Joshua Boniface 73c96d1e93 Add VM device hot attach/detach support
Adds a new API endpoint to support hot attach/detach of devices, and the
corresponding client-side logic to use this endpoint when doing VM
network/storage add/remove actions.

The live attach is now the default behaviour for these types of
additions and removals, and can be disabled if needed.

Closes #141
2021-09-12 19:33:00 -04:00
Joshua Boniface bc6395c959 Don't crash cleanup if no this_node 2021-08-29 03:52:18 -04:00
Joshua Boniface d582f87472 Change default node object state to flushed 2021-08-29 03:34:08 -04:00
Joshua Boniface e9735113af Bump version to 0.9.34 2021-08-24 16:15:25 -04:00
Joshua Boniface d3392c0282 Fix typo in output message 2021-08-23 00:39:19 -04:00
Joshua Boniface 560c013e95 Bump version to 0.9.33 2021-08-21 03:28:48 -04:00
Joshua Boniface 534c7cd7f0 Refactor pvcnoded to reduce Daemon.py size
This branch commit refactors the pvcnoded component to better adhere to
good programming practices. The previous Daemon.py was a massive file
which contained almost 2000 lines of direct, root-level code which was
directly imported. Not only was this poor practice, but this resulted
in a nigh-unmaintainable file which was hard even for me to understand.

This refactoring splits a large section of the code from Daemon.py into
separate small modules and functions in the `util/` directory. This will
hopefully make most of the functionality easy to find and modify without
having to dig through a single large file.

Further the existing subcomponents have been moved to the `objects/`
directory which clearly separates them.

Finally, the Daemon.py code has mostly been moved into a function,
`entrypoint()`, which is then called from the `pvcnoded.py` stub.

An additional item is that most format strings have been replaced by
f-strings to make use of the Python 3.6 features in Daemon.py and the
utility files.
2021-08-21 03:14:22 -04:00
Joshua Boniface 4014ef7714 Bump version to 0.9.32 2021-08-19 12:37:58 -04:00
Joshua Boniface 180f0445ac Properly handle exceptions getting VM stats 2021-08-19 12:36:31 -04:00
Joshua Boniface 7ecc6a2635 Bump version to 0.9.31 2021-07-30 12:08:12 -04:00
Joshua Boniface 3ab6365a53 Adjust receive output to show proper source 2021-07-22 15:43:08 -04:00
Joshua Boniface 2a99a27feb Bump version to 0.9.30 2021-07-20 00:01:45 -04:00
Joshua Boniface fa1d93e933 Bump version to 0.9.29 2021-07-19 16:55:41 -04:00
Joshua Boniface 6ead21a308 Handle cleanup from a failure properly 2021-07-19 12:39:13 -04:00
Joshua Boniface b7c8c2ee3d Fix handling of this_node and d_domain in cleanup 2021-07-19 12:36:35 -04:00
Joshua Boniface d48f58930b Use harder exits and add cleanup termination 2021-07-19 12:27:16 -04:00
Joshua Boniface 7c36388c8f Add post-networking delay and adjust daemon delay 2021-07-19 12:23:45 -04:00
Joshua Boniface 71e4d0b32a Bump version to 0.9.28 2021-07-19 09:29:34 -04:00
Joshua Boniface 15d92c483f Bump version to 0.9.27 2021-07-19 00:03:40 -04:00
Joshua Boniface 602093029c Bump version to 0.9.26 2021-07-18 20:49:52 -04:00
Joshua Boniface b770e15a91 Fix final termination of logger
We need to do a bit more finagling with the logger on termination to
ensure that all messages are written and the queue drained before
actually terminating.
2021-07-18 19:53:00 -04:00
Joshua Boniface e23a65128a Remove del of logger item 2021-07-18 19:03:47 -04:00
Joshua Boniface 3a2478ee0c Cleanly terminate logger on cleanup 2021-07-18 18:57:44 -04:00
Joshua Boniface 323c7c41ae Implement node logging into Zookeeper
Adds the ability to send node daemon logs to Zookeeper to facilitate a
command like "pvc node log", similar to "pvc vm log". Each node stores
its logs in a separate tree under "/logs" which can then be combined or
queried. By default, set by config, only 2000 lines are kept.
2021-07-18 17:11:43 -04:00
Joshua Boniface cd1db3d587 Ensure node name is part of confing 2021-07-18 16:38:58 -04:00