This document contains considerations the administrator should make when preparing for and building a PVC cluster. It includes four main subsections: node specifications, storage specifications, network layout, and node layout, plus a fifth section featuring diagrams of 3 example topologies.
## Node Specifications: Considering the size of nodes
Each node in the cluster must be sized based on the needs of the cluster and the load placed on it. In general, taller nodes are generally better for performance and allow for a more powerful cluster on less hardware, though the needs of each specific environment and workload my affect this differently.
At a bare minimum, each node should have the following specifications:
* 12x 1.8GHz or better Intel/AMD cores from at least the Nehalem/Bulldozer eras (~2008 or newer)
* 48GB of RAM
* 2x 1Gbps Ethernet interfaces
* 1x 10GB+ system disk (SSD/HDD/USB/SD/eMMC flash)
* 1x 400GB+ OSD data disk (SSD)
From a cluster of 3 such nodes, this will provide a cluster total of:
* 36 total CPU cores
* 144GB total RAM
* 400GB usable Ceph storage space (`copies=3`)
Of this, some amount of CPU and RAM will be used by the storage subsystem and the PVC daemons themselves, meaning that the total available for virtual machines is slightly less. Generally, each OSD data disk will consume 1 vCPU at load and 1-2GB RAM, so nodes should be sized not only according to the VM workload, but the number of storage disks per node. Additionally the coordinator databases will use additional RAM and CPU resources of up to 1-4GB per node, though there is generally little need to spec coordinators any larger than non-coordinator nodes and the VM automatic node selection process will take used RAM into account by default.
## Storage Layout: Ceph and OSDs
The Ceph subsystem of PVC, if enabled, creates a "hyperconverged" setup whereby storage and VM hypervisor functions are colocated onto the same physical servers. The performance of the storage must be taken into account when sizing the nodes as mentioned above.
The Ceph system is laid out similar to the other daemons. The Ceph Monitor and Manager functions are delegated to the Coordinators over the cluster network, with all nodes connecting to these hosts to obtain the CRUSH maps and select OSD disks. OSDs are then distributed on all hosts, including non-coordinator hypervisors, and communicate with clients over the cluster network and with each other (for replication, failover, etc.) over the storage network.
Without exception for proper redundancy, Ceph pools on the cluster use the `copies=3``mincopies=2` replication scheme. That is to say, for each 4MB "object" the cluster stores, it will store 3 copies on 3 different nodes; if one copy becomes unavalable, due to a node maintenance or failure, the other 2 copies continue to enable read/write access to the clouster; if two copies become unavainable, writes to the cluster will block however reads will still proceed from the single remaining copy, allowing recovery. More than 3 nodes running OSD disks increases the resiliency of the cluster, however object placement is decided at write time and is evenly distributed across the cluster, so even in very large clusters only 1 node can be down at one time and writes guaranteed to succeed.
In this configuration, therefore, each 1MB of storage at the VM layer consumes 3MB (3 copies) of storage at the raw disk layer. Size OSD disks accordingly to ensure sufficient storage space and performance. Future versions of PVC may support more complex Ceph storage layouts, such as `copies=4``mincopies=2` or multiple-parity Erasure Coding pools.
## Network Layout: Considering the required networks
A PVC cluster needs, at minimum, 3 networks in order to function properly. Each of the three networks and its function is detailed below. An additional two sections cover the two kinds of client networks and the considerations for them.
### Physical network considerations
At a minimum, a PVC cluster should use at least two 1Gbps Ethernet interfaces, connected in an LACP or active-backup bond on one or more switches. On top of this bond, the various cluster networks should be configured as vLANs.
More advanced physical network layouts are also possible. For instance, one could have two isolated networks. On the first network, each node has two 10Gbps Ethernet interfaces, which are combined in a bond across two redundant switch fabrics and that handle the upstream and cluster networks. On the second network, each node has an additional two 10Gbps, which are also combined in a bond across the redundant switch fabrics and handle the storage network. This configuration could support up to 10Gbps of aggregate client traffic while also supporting 10Gbps of aggregate storage traffic. Even more complex network configurations are possible if the cluster requires such performance.
### Upstream: Connecting the nodes to the wider world
The upstream network functions as the main upstream for the cluster nodes, providing Internet access and a way to route managed client network traffic out of the cluster. In most deployments, this should be an RFC1918 private subnet with an upstream router which can perform NAT translation and firewalling as required, both for the cluster nodes themselves, but also for the RFC1918 managed client networks.
The floating IP address in the upstream network can be used as a single point of communication with the PVC cluster from other upstream sources, for instance to access the DNS aggregator instance or the API if configured. For this reason the network should generally be protected from unauthorized access via a firewall.
Nodes in this network are generally assigned static IP addresses which are configured at node install time and in the [Ansible deployment configuration](/manuals/ansible).
The upstream router should be able to handle static routes to the PVC cluster, or form a BGP neighbour relationship with the coordinator nodes and/or floating IP address to learn routes to the managed client networks.
The upstream network should generally be large enough to contain:
0. The upstream router(s)
0. The nodes themselves
0. In most deployments, the node IPMI management interfaces.
For example, for a 3+ node cluster, up to about 90 nodes, the following configuration might be used:
| Description | Address |
|-------------|---------|
| Upstream network | 10.0.0.0/24 |
| Router VIP address | 10.0.0.1 |
| Router 1 address | 10.0.0.2 |
| Router 2 address | 10.0.0.3 |
| PVC floating address | 10.0.0.10 |
| node1 | 10.0.0.11 |
| node2 | 10.0.0.12 |
| etc. | etc. |
| node1-ipmi | 10.0.0.111 |
| node2-ipmi | 10.0.0.112 |
| etc. | etc. |
For even larger clusters, a `/23` or even larger network may be used.
### Cluster: Connecting the nodes with each other
The cluster network is an unrouted private network used by the PVC nodes to communicate with each other for database access, Libvirt migration, and storage client traffic. It is also used as the underlying interface for the BGP EVPN VXLAN interfaces used by managed client networks.
The floating IP address in the cluster network can be used as a single point of communication with the primary node.
Nodes in this network are generally assigned IPs automatically based on their node number (e.g. node1 at `.1`, node2 at `.2`, etc.). The network should be large enough to include all nodes sequentially.
Generally the cluster network should be completely separate from the upstream network, either a separate physical interface (or set of bonded interfaces) or a dedicated vLAN on an underlying physical device.
### Storage: Connecting Ceph OSD with each other
The storage network is an unrouted private network used by the PVC node storage OSDs to communicated with each other, without using the main cluster network and introducing potentially large amounts of traffic there.
Nodes in this network are generally assigned IPs automatically based on their node number. The network should be large enough to include all nodes squentially.
The administrator may choose to colocate the storage network on the same physical interface as the cluster network, or on a separate physical interface. This should be decided based on the size of the cluster and the perceved ratios of client network versus storage traffic. In large (>3 node) or storage-intensive clusters, this network should generally be a separate set of fast physical interfaces, separate from both the upstream and cluster networks, in order to maximize and isolate the storage bandwidth.
### Bridged (unmanaged) Client Networks
The first type of client network is the unmanaged bridged network. These networks have a separate vLAN on the device underlying the cluster network, which is created when the network is configured. VMs are then bridged into this vLAN.
With this client network type, PVC does no management of the network. This is left entirely to the administrator. It requires switch support and the configuration of the vLANs on the switchports of each node's cluster network before enabling the network.
### VXLAN (managed) Client Networks
The sceond type of client network is the managed VXLAN network. These networks make use of BGP EVPN, managed by route reflection on the coordinators, to create virtual layer 2 Ethernet tunnels between all nodes in the cluster. VXLANs are then run on top of these virtual layer 2 tunnels, with the primary PVC node providing routing, DHCP, and DNS functionality to the network via a single IP address.
With this client network type, PVC is in full control of the network. No vLAN configuration is required on the switchports of each node's cluster network as the virtual layer 2 tunnel travels over the cluster layer 3 network. All client network traffic destined for outside the network will exit via the upstream network of the primary coordinator node; note that this may introduce a bottleneck and tromboning if there is a large amount of external and/or inter-network traffic on the cluster. The administrator should consider this carefully when sizing the cluster network.
Future PVC versions may support other client network types, such as direct-routing between VMs.
## Node Layout: Considering how nodes are laid out
At a minimum, a PVC cluster requires at least 3 nodes running the PVC Daemon software. 1-node clusters are technically supported but provide no redundancy; they should be used only for testing purposes. Additionally, it's possible to configure a cluster with only 2 active, VM-containing nodes, and a 3rd node handling only coordinator quorum functionality, though this is more complex and less ideal.
### Node Functions: Coordinators versus Hypervisors
Within PVC, a given node can have one of two main functions: it can be a "Coordinator" or a "Hypervisor".
#### Coordinators
Coordinators are a special set of 3, 5, or potentially 7, though no more, nodes with additional functionality. The coordinator nodes run, in addition to the PVC software itself, a number of databases and additional functions which are required by the whole cluster. An odd number of coordinators is *always* required to maintain quorum, though there are diminishing returns when creating more than 3. These additional functions are:
0. The Zookeeper database containing the cluster state and configuration
0. The DNS aggregation Patroni PostgreSQL database containing DNS records for all client networks
0. The FRR EBGP route reflectors and upstream BGP peers
In addition to these functions, coordinators can usually also run all other PVC node functions.
The set of coordinator nodes is generally configured at cluster bootstrap, generally 3 nodes, which are then bootstrapped together to form the initial 3-node cluster. Additional nodes, either as coordinators or as hypervisors, are then added to the running cluster.
##### The Primary Coordinator
Within the set of coordinators, a single primary coordinator is elected and shuffles around the cluster as nodes start and stop. Which coordinator is primary can be selected by the administrator manually, or via a simple election process within the cluster. Once a node becomes primary, it will remain so until told not to be. This coordinator is responsible for some additional functionality in addition to the other coordinators. These additional functions are:
0. The floating IPs in the main networks
0. The default gateway IP for each managed client network
0. The DNSMasq instance handling DHCP and DNS for each managed client network
#### Hypervisors
Hypervisors consist of all other PVC nodes in the cluster. For small clusters (3 nodes), there will generally not be any non-coordinator nodes, though adding a 4th would require it to be a hypervisor and preserve quorum between the coordinators. For large clusters of more than a few hosts, generally all except the first 3, 5, or for very large clusters 7, nodes should be hypervisors only, to avoid sprawl in the number of database nodes that must be kept in sync.
## Example Configurations
This section provides diagrams of 3 possible node configurations, providing an idea of the sort of cluster topologies supported by PVC.
#### Basic 3-node cluster
*Above: A diagram of a simple 3-node cluster; all nodes are coordinators, single 1Gbps network interface per node, collapsed cluster and storage networks*
#### Midsized 8-node cluster with 3 coordinators
*Above: A diagram of a midsized 8-node cluster with 3 coordinators, dual bonded 10Gbps network interfaces per node*
#### Large 17-node cluster with 5 coordinators.
*Above: A diagram of a large 17-node cluster with 5 coordinators, dual bonded 10Gbps network interfaces per node for both cluster/upstream and storage networks*
