# PVC install.sh preseed configuration Jinja2 template # # This BASH-compliant variables file is Loaded during PXE installs to preseed the environment. # During normal usage, the pvcbootstrapd will load this file, adjust it according to its needs, # and write out one instance per node to be installed. # # This file is thus not designed to be used by humans, and its values are seeded via options in # the cluster-local Ansible group_vars, though it can be used as a manual template if required. ### ### General definitions/overrides ### {% if debrelease is defined and debrelease %} # The Debian release to use (overrides the default) #debrelease="buster" debrelease="{debrelease}" {% endif %} {% if debmirror is defined and debmirror %} # The Debian mirror to use (overrides the default) #debmirror="http://debian.mirror.rafal.ca/debian" debmirror="{debmirror}" {% endif %} {% if addpkglist is defined and addpkglist %} # Additional packages (comma-separated) to install in the base system #addpkglist="mypackage,otherpackage" addpkglist="{addpkglist}" {% endif %} {% if filesystem is defined and filesystem %} # Alternate filesystem for system volumes (/, /var/lib/ceph, /var/lib/zookeeper) #filesystem=ext4 filesystem="{filesystem}" {% endif %} {% if skip_blockcheck is defined and skip_blockcheck %} # Skip block zeroing; only recommended for testing, slow, low-endurance, or known-zeroed block devices. skip_blockcheck="y" {% endif %} ### ### Per-host definitions (required) ### # The hostname of the system (set per-run) #target_hostname="myhostname.domain.tld" target_hostname="{hostname}" # The target system disk (either a path or model to find; path overrides model if set) # Install will fail if these devices aren't found. {% if target_disk_path is defined and target_disk_path %} #target_disk_path="/dev/disk/by-path/pci-0000:03:00.0-scsi-0:1:0:0" # Example: RAID device via explicit path target_disk_path="{target_disk_path}" {% end if %} {% if target_disk_model is defined and target_disk_model %} #target_disk_model="DELLBOSS VD" # Example: Dell BOSS on R6515 via model name target_disk_model="{target_disk_model}" {% end if %} # SSH key method (usually tftp) target_keys_method="tftp" # SSH key path (usually keys.txt) target_keys_path="keys.txt" # Deploy username (usually deploy) target_deploy_user="deploy" # Consoles to use by the inital boot process; these are normally set automatically # based on the TTYs found by the installer, and are later overridden by the Ansible # playbooks based on the hardware configuration. It is best to leave this commented # unless you know that you need it. #target_consoles="console=tty1 console=ttyS1,115200" # Installer checkin URI (provided by pvcbootstrapd) #pvcbootstrapd_checkin_uri="http://10.199.199.254:9999/checkin/installer" pvcbootstrapd_checkin_uri="{pvcbootstrapd_checkin_uri}"