Add support for vLANs in installer

This commit is contained in:
Joshua Boniface 2020-09-25 12:01:51 -04:00
parent cd72cb7b52
commit 192c7ba18a
2 changed files with 60 additions and 12 deletions

View File

@ -107,7 +107,7 @@ prepare_iso() {
prepare_rootfs() {
echo -n "Preparing Debian live installation via debootstrap... "
SQUASHFS_PKGLIST="mdadm,lvm2,parted,gdisk,debootstrap,grub-pc,grub-efi-amd64,linux-image-amd64,sipcalc,live-boot,dosfstools,vim,ca-certificates"
SQUASHFS_PKGLIST="mdadm,lvm2,parted,gdisk,debootstrap,grub-pc,grub-efi-amd64,linux-image-amd64,sipcalc,live-boot,dosfstools,vim,ca-certificates,vlan"
if [[ ! -d artifacts/debootstrap ]]; then
sudo mkdir -p artifacts/debootstrap/var/cache/apt/archives &>/dev/null
clean_me="y"

View File

@ -59,6 +59,8 @@ echo "2) Please enter the disk to install the PVC base system to. This disk will
echo "wiped, an LVM PV created on it, and the system installed to this LVM."
echo "NOTE: PVC requires a disk of >16GB to be installed to. 32GB is the recommended"
echo "minimum size, and disks larger than 64GB are not particularly useful."
echo "NOTE: This disk should generally be a RAID-1 volume configured in hardware for"
echo "maximum redundancy and resiliency."
echo
echo "Available disks:"
echo
@ -102,7 +104,28 @@ while [[ -z ${target_interface} ]]; do
echo
done
echo "3b) Please enter the IP address, in CIDR format [X.X.X.X/YY], of the primary"
echo -n "3b) Is a tagged vLAN required for the primary network interface? [y/N] "
read vlans_req
if [[ ${vlans_req} == 'y' || ${vlans_req} == 'Y' ]]; then
echo
echo "Please enter the vLAN ID for the interface."
while [[ -z ${vlan_id} ]]; do
echo
echo -n "> "
read vlan_id
if [[ -z ${vlan_id} ]]; then
echo
echo "Please enter a numeric vLAN ID."
continue
fi
done
echo
else
vlan_id=""
echo
fi
echo "3c) Please enter the IP address, in CIDR format [X.X.X.X/YY], of the primary"
echo "network interface. Leave blank for DHCP configuration of the interface on boot."
echo
echo -n "> "
@ -110,7 +133,7 @@ read target_ipaddr
if [[ -n ${target_ipaddr} ]]; then
target_netformat="static"
echo
echo "3c) Please enter the default gateway IP address of the primary"
echo "3d) Please enter the default gateway IP address of the primary"
echo "network interface."
while [[ -z ${target_defgw} ]]; do
echo
@ -131,19 +154,44 @@ fi
echo -n "Bringing up primary network interface in ${target_netformat} mode... "
case ${target_netformat} in
'static')
ip link set ${target_interface} up >&2 || true
ip address add ${target_ipaddr} dev ${target_interface} >&2 || true
ip route add default via ${target_defgw} >&2 || true
formatted_ipaddr="$( sipcalc ${target_ipaddr} | grep -v '(' | awk '/Host address/{ print $NF }' )"
formatted_netmask="$( sipcalc ${target_ipaddr} | grep -v '(' | awk '/Network mask/{ print $NF }' )"
target_interfaces_block="auto ${target_interface}\niface ${target_interface} inet ${target_netformat}\n\taddress ${formatted_ipaddr}\n\tnetmask ${formatted_netmask}\n\tgateway ${target_defgw}"
if [[ -n ${vlan_id} ]]; then
modprobe 8021q >&2
vconfig add ${target_interface} ${vlan_id} >&2
vlan_interface=${target_interface}.${vlan_id}
ip link set ${target_interface} up >&2 || true
ip link set ${vlan_interface} up >&2 || true
ip address add ${target_ipaddr} dev ${vlan_interface} >&2 || true
ip route add default via ${target_defgw} >&2 || true
formatted_ipaddr="$( sipcalc ${target_ipaddr} | grep -v '(' | awk '/Host address/{ print $NF }' )"
formatted_netmask="$( sipcalc ${target_ipaddr} | grep -v '(' | awk '/Network mask/{ print $NF }' )"
target_interfaces_block="auto ${vlan_interface}\niface ${vlan_interface} inet ${target_netformat}\n\tvlan_raw_device ${target_interface}\n\taddress ${formatted_ipaddr}\n\tnetmask ${formatted_netmask}\n\tgateway ${target_defgw}"
real_interface="${vlan_interface}"
else
ip link set ${target_interface} up >&2 || true
ip address add ${target_ipaddr} dev ${target_interface} >&2 || true
ip route add default via ${target_defgw} >&2 || true
formatted_ipaddr="$( sipcalc ${target_ipaddr} | grep -v '(' | awk '/Host address/{ print $NF }' )"
formatted_netmask="$( sipcalc ${target_ipaddr} | grep -v '(' | awk '/Network mask/{ print $NF }' )"
target_interfaces_block="auto ${target_interface}\niface ${target_interface} inet ${target_netformat}\n\taddress ${formatted_ipaddr}\n\tnetmask ${formatted_netmask}\n\tgateway ${target_defgw}"
real_interface="${target_interface}"
fi
cat <<EOF >/etc/resolv.conf
nameserver 8.8.8.8
EOF
;;
'dhcp')
dhclient ${target_interface} >&2
target_interfaces_block="auto ${target_interface}\niface ${target_interface} inet ${target_netformat}"
if [[ -n ${vlan_id} ]]; then
modprobe 8021q >&2
vconfig add ${target_interface} ${vlan_id} >&2
vlan_interface=${target_interface}.${vlan_id}
target_interfaces_block="auto ${vlan_interface}\niface ${vlan_interface} inet ${target_netformat}\n\tvlan_raw_device${target_interface}"
dhclient ${vlan_interface} >&2
real_interface="${vlan_interface}"
else
target_interfaces_block="auto ${target_interface}\niface ${target_interface} inet ${target_netformat}"
dhclient ${target_interface} >&2
real_interface="${target_interface}"
fi
;;
esac
echo "done."
@ -372,7 +420,7 @@ echo "done."
echo -n "Setting /etc/issue generator... "
mkdir -p ${target}/etc/network/if-up.d >&2
echo -e "#!/bin/sh
IP=\"\$( ip -4 addr show dev ${target_interface} | grep inet | awk '{ print \$2 }' | head -1 )\"
IP=\"\$( ip -4 addr show dev ${real_interface} | grep inet | awk '{ print \$2 }' | head -1 )\"
cat <<EOF >/etc/issue
Debian GNU/Linux 10 \\\\n \\\\l