parallelvirtualcluster
/
docs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix formatting

This commit is contained in:
Joshua Boniface 2024-10-25 02:29:31 -04:00
parent e81211e3c6
commit 968855eca8
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/deployment/getting-started.md
View File

@ -105,7 +105,7 @@ You will also need a switch to connect the nodes, capable of vLAN trunks passing
hv2.cluster2.mydomain.tld
hv3.cluster2.mydomain.tld
Note that the hostnames given here must be the actual reachable FQDNs of the hypervisor nodes; if they do not resolve in DNS, you can use the `ansible_host=` per-entry variable to set the IP address in the "upstream" network for each node.
❕ **NOTE** The hostnames given here must be the actual reachable FQDNs of the hypervisor nodes in the "upstream" network; if they do not resolve in DNS, you can use the `ansible_host=` per-entry variable to set the IP address in the "upstream" network for each node.
0. In your local repository, enter the `group_vars` directory, and create a new directory for the cluster which matches the title (inside `[`/`]` square brackets) in the above `hosts` file. For example, `cluster1`.
@ -700,7 +700,7 @@ Of special note is the `pvc_nodes` section. This must contain a listing of all n
b. For disks, all options presented are supported, though the defaults are recommended.
c. For networking, during this initial state we only need a single interface to get basic connectivity and prepare for Ansible. Generally speaking, setup and bootstrapping is easier if you have a dedicated "setup" NIC in a network directly reachable by your management host (`upstream` or another network), then allow the `pvc-ansible` system to configure the "main" interfaces from there. If this is not possible, you can configure both a bond and a vLAN on top during the installer to pre-configure your `upstream` interface. You can use either DHCP (if you are using a dedicated "setup" network) or a static IP (if you are directly configuring the `upstream` network now).
c. For networking, during this initial state we only need a single interface to get basic connectivity and prepare for Ansible. Generally speaking, setup and bootstrapping is easier if you have a dedicated "setup" NIC in a network directly reachable by your management host ("upstream" or another network), then allow the `pvc-ansible` system to configure the "main" interfaces from there. If this is not possible, you can configure both a bond and a vLAN on top during the installer to pre-configure your "upstream" interface. You can use either DHCP (if you are using a dedicated "setup" network) or a static IP (if you are directly configuring the "upstream" network now).
❕ **NOTE** The installer won't proceed until networking is up. If you need to stop and troubleshoot, you can launch another virtual console using Ctrl+Alt+F2 or similar, cancel the installer script, and interrogate the installer environment in more detail.