--- ############################################################################### # SuperSensor v1.0 ESPHome configuration ############################################################################### # # Copyright (C) 2023 Joshua M. Boniface # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, version 3. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # ############################################################################### substitutions: # How long a PIR activation should be held for pir_holdtime: "10s" esphome: name: supersensor name_add_mac_suffix: true friendly_name: "Supersensor" on_boot: - priority: 600 then: - light.turn_on: id: output_led effect: flash red: 1 green: 1 blue: 1 - priority: -500 then: - wait_until: api.connected - delay: 2s - switch.turn_on: use_wake_word - delay: 2s - switch.turn_off: use_wake_word - delay: 2s - switch.turn_on: use_wake_word - light.turn_off: id: output_led esp32: board: esp32dev framework: type: esp-idf sdkconfig_options: CONFIG_ESP32_DEFAULT_CPU_FREQ_240: "y" CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ: "240" CONFIG_ESP32_DATA_CACHE_64KB: "y" CONFIG_ESP32_DATA_CACHE_LINE_64B: "y" CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y" CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ: "240" CONFIG_ESP32S3_DATA_CACHE_64KB: "y" CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y" script: - id: pir_handler then: - lambda: |- id(pir_motion).publish_state(true); - delay: ${pir_holdtime} - lambda: |- id(pir_motion).publish_state(false); # Enable logging only via web logger: level: DEBUG baud_rate: 115200 api: encryption: key: !secret api_encryption_key ota: password: !secret ota_password safe_mode: false web_server: port: 80 auth: username: !secret web_auth_username password: !secret web_auth_password wifi: ssid: !secret wifi_ssid password: !secret wifi_password domain: !secret wifi_domain power_save_mode: LIGHT reboot_timeout: 5min uart: rx_pin: GPIO16 tx_pin: GPIO17 baud_rate: 115200 setup_priority: 200 i2c: sda: GPIO21 scl: GPIO22 scan: true i2s_audio: i2s_lrclk_pin: GPIO25 i2s_bclk_pin: GPIO26 microphone: - platform: i2s_audio id: mic adc_type: external i2s_din_pin: GPIO27 pdm: false voice_assistant: microphone: mic use_wake_word: false noise_suppression_level: 2 auto_gain: 31dBFS volume_multiplier: 4.0 id: assist on_wake_word_detected: - light.turn_off: id: output_led - light.turn_on: id: output_led red: 0 green: 0 blue: 1 on_listening: - light.turn_on: id: output_led red: 0 green: 0 blue: 1 on_stt_end: - light.turn_off: id: output_led transition_length: 1s on_tts_start: - light.turn_off: id: output_led transition_length: 1s - if: condition: lambda: return x != "Sorry, I couldn't understand that"; then: - logger.log: "Command successful!" - light.turn_on: id: output_led effect: hold red: 0 green: 1 blue: 0 else: - logger.log: "Command failed!" - light.turn_on: id: output_led effect: hold red: 1 green: 0 blue: 0 light: - platform: rgb id: output_led red: rgb_r green: rgb_g blue: rgb_b default_transition_length: 0.15s flash_transition_length: 0.15s effects: - strobe: name: flash colors: - state: true duration: 0.5s - state: false duration: 0.5s - automation: name: hold sequence: - delay: 5s - light.turn_off: id: output_led transition_length: 1s output: - platform: ledc id: rgb_r pin: GPIO14 - platform: ledc id: rgb_g pin: GPIO12 - platform: ledc id: rgb_b pin: GPIO13 button: - platform: restart name: "ESP32 Restart" icon: mdi:power-cycle entity_category: "diagnostic" switch: - platform: template name: "Enable Wake Word" icon: mdi:account-voice id: use_wake_word optimistic: true restore_mode: ALWAYS_OFF entity_category: config on_turn_on: - lambda: id(assist).set_use_wake_word(true); - if: condition: not: - voice_assistant.is_running then: - voice_assistant.start_continuous on_turn_off: - voice_assistant.stop - lambda: id(assist).set_use_wake_word(false); binary_sensor: - platform: gpio name: "PIR GPIO" id: pir_gpio pin: number: GPIO33 mode: input: true pulldown: true internal: false device_class: motion on_press: - script.execute: pir_handler - platform: template name: "PIR Motion" id: pir_motion device_class: motion sensor: - platform: bme280 temperature: name: "BME280 Temperature" pressure: name: "BME280 Pressure" humidity: name: "BME280 Humidity" update_interval: 15s address: 0x76 - platform: bmp280 temperature: name: "BMP280 Temperature" pressure: name: "BMP280 Pressure" update_interval: 15s address: 0x76 - platform: uptime name: "ESP32 Uptime" icon: mdi:clock-alert update_interval: 15s entity_category: "diagnostic" - platform: wifi_signal name: "ESP32 WiFi RSSI" icon: mdi:wifi-strength-2 update_interval: 15s entity_category: "diagnostic" - platform: internal_temperature name: "ESP32 Temperature" icon: mdi:thermometer unit_of_measurement: °C device_class: TEMPERATURE update_interval: 15s entity_category: "diagnostic" - platform: template name: "ESP32 CPU Frequency" icon: mdi:cpu-32-bit accuracy_decimals: 1 unit_of_measurement: MHz update_interval: 15s lambda: |- return ets_get_cpu_frequency(); entity_category: "diagnostic" - platform: template name: "ESP32 Free Memory" icon: mdi:memory unit_of_measurement: 'kB' state_class: measurement update_interval: 15s lambda: |- return heap_caps_get_free_size(MALLOC_CAP_INTERNAL) / 1024; entity_category: "diagnostic"