Add SGP30 baseline sensors

60s felt like far too long.

README.md

@@ -1,7 +1,7 @@
 # SuperSensor v2.x
 
-The SuperSensor is an all-in-one voice, motion, presence, temperature/humidity/
-air quality, and light sensor, built on an ESP32 with ESPHome, and inspired
+The SuperSensor is an all-in-one voice, motion, presence, temperature/humidity/air
+quality, and light sensor, built on an ESP32 with ESPHome, and inspired
 heavily by the EverythingSmartHome Everything Presence One sensor and the
 HomeAssistant "$13 Voice Assistant" project.
 
@@ -17,7 +17,7 @@ it bare if you like the "PCB on a wall" aesthetic.
 
 To Use:
 
-  * Install the ESPHome configuration `supersensor-2.x.yaml` to a compatible ESP32 devkit (below).
+  * Install the ESPHome configuration `supersensor.yaml` to a compatible ESP32 devkit (below).
   * Install the ESP32 and sensors into the custom PCB (if desired).
   * [Optional] 3D Print the custom case.
   * Power up the SuperSensor, connect to the WiFi AP, and connect it to your network.
@@ -69,7 +69,6 @@ and [my update post on version 2.0](https://www.boniface.me/the-supersensor-2.0)
 
 ## Parts List
 
-|-------|--------------------|----------------------------------|-------|
 | Qty   | Component          | Cost (2025/05 CAD, ex. shipping) | Links |
 |-------|--------------------|----------------------------------|-------|
 | 1     | GY-SGP30           | $5.73                            | [AliExpress](https://www.aliexpress.com/item/1005008473372972.html)  |
@@ -84,12 +83,12 @@ and [my update post on version 2.0](https://www.boniface.me/the-supersensor-2.0)
 | 1     | Female pin header† | $1.59 ($15.99/10)                | [Amazon](https://www.amazon.ca/dp/B08CMNRXJ1) |
 | 1     | Custom PCB (JLC)   | $0.69 ($6.89/10)                 | [GitHub](https://github.com/joshuaboniface/supersensor) |
 | 1     | 3D Printed case    | $?.??‡                           | [GitHub](https://github.com/joshuaboniface/supersensor) |
-|-------|--------------------|----------------------------------|-------|
-| TOTAL |                    | $33.64                           |       |
-|-------|--------------------|----------------------------------|-------|
+| **TOTAL** |                    | **$33.64**                           |       |
 
 `*` Ensure you select the correct device on the page as it shows multiple options.
+
 `†` This is optional and only required if you don't want to directly solder the ESP32 to the board, but I recommend it.
+
 `‡` Providing a price is impossible due to the wide range of possible fillament types and brands, but should be negligible.
 
 ## Configurable Options

supersensor.yaml

@@ -53,7 +53,7 @@ esphome:
               - switch.turn_on: voice_support_active
 
 dashboard_import:
-  package_import_url: github://joshuaboniface/supersensor/supersensor-2.x.yaml
+  package_import_url: github://joshuaboniface/supersensor/supersensor.yaml@2.x
 
 esp32:
   board: esp32dev
@@ -364,7 +364,8 @@ interval:
           }
 
 micro_wake_word:
-  model: hey_jarvis
+  models:
+    - model: hey_jarvis
   on_wake_word_detected:
     then:
       - voice_assistant.start:
@@ -491,13 +492,13 @@ light:
 output:
   - platform: ledc
     id: rgb_r
-    pin: GPIO32
+    pin: GPIO23
   - platform: ledc
     id: rgb_g
-    pin: GPIO33
+    pin: GPIO22
   - platform: ledc
     id: rgb_b
-    pin: GPIO25
+    pin: GPIO21
 
 ld2410:
   id: ld2410_radar
@@ -513,6 +514,15 @@ sensor:
       name: "SGP30 TVOC"
       id: sgp30_tvoc
       accuracy_decimals: 1
+    eco2_baseline:
+      name: "SGP30 Baseline eCO2"
+      id: sgp30_baseline_ec02
+    tvoc_baseline:
+      name: "SGP30 Baseline TVOC"
+      id: sgp30_baseline_tvoc
+    compensation:
+      temperature_source: sht45_temperature
+      humidity_source: sht45_humidity
     store_baseline: yes
     update_interval: 15s
 
@@ -559,7 +569,7 @@ sensor:
       if (tvoc > 2200 || eco2 > 2000) return 1; // Unhealthy
       if (tvoc > 660 || eco2 > 1200) return 2; // Poor
       if (tvoc > 220 || eco2 > 800) return 3; // Moderate
-      if (tvoc > 65 || eco2 > 600) return 4; // Good
+      if (tvoc > 65 || eco2 > 500) return 4; // Good
       return 5; // Excellent
     update_interval: 15s
 
@@ -690,7 +700,7 @@ binary_sensor:
   - platform: gpio
     name: "PIR GPIO"
     id: pir_gpio
-    pin: GPIO13
+    pin: GPIO32
     internal: false
     device_class: motion
     on_press:
@@ -1070,6 +1080,7 @@ text_sensor:
     name: "CO2 Level"
     lambda: |-
       int eco2 = id(sgp30_eco2).state;
+      if (eco2 < 500) return {"Excellent"};
       if (eco2 < 800) return {"Good"};
       if (eco2 < 1200) return {"Moderate"};
       if (eco2 < 2000) return {"Poor"};