Adjust TSL to 2s update

1s is too frequent and would sometimes fail to poll.

supersensor.yaml

@@ -164,24 +164,19 @@ globals:
     restore_value: yes
     initial_value: '"mww_computer"'
 
+  - id: light_is_holding
+    type: bool
+    restore_value: no
+    initial_value: 'false'
+
 script:
-  - id: presence_light_on
-    then:
-      if:
-        condition:
-          - switch.is_on: enable_presence_led
-          - light.is_off: output_led
-        then:
-          - light.turn_on:
-              id: output_led
-              brightness: 25%
-              red: 1
-              green: 1
-              blue: 1
-              transition_length: 1s
   - id: light_off
     then:
-      if:
+      - if:
+          condition:
+            lambda: 'return !id(light_is_holding);'
+          then:
+            - if:
                 condition:
                   - binary_sensor.is_on: supersensor_occupancy
                   - switch.is_on: enable_presence_led
@@ -446,7 +441,7 @@ micro_wake_word:
   id: mww
   microphone:
     microphone: mic
-    gain_factor: 64
+    gain_factor: 2
   stop_after_detection: false
   models:
     - model: github://joshuaboniface/Custom_V2_MicroWakeWords/models/computer/computer.json
@@ -556,7 +551,13 @@ light:
       - automation:
           name: hold
           sequence:
+            - globals.set:
+                id: light_is_holding
+                value: "true"
             - delay: 5s
+            - globals.set:
+                id: light_is_holding
+                value: "false"
             - script.execute: light_off
 
 output:
@@ -693,6 +694,20 @@ sensor:
       id: sht45_humidity
       accuracy_decimals: 1
       filters:
+        - lambda: |-
+            // Grab measured and corrected temperatures
+            float t_meas = id(sht45_temperature).state - id(temperature_offset);
+            float t_corr = id(sht45_temperature).state;
+            float rh_meas = x;
+
+            // Compute saturation vapor pressures (Magnus formula)
+            auto es = [](float T) { return 6.112 * exp((17.62 * T) / (243.12 + T)); };
+            float rh_corr = rh_meas * es(t_meas) / es(t_corr);
+
+            // Clamp to 0–100 %
+            if (rh_corr < 0) rh_corr = 0;
+            if (rh_corr > 100) rh_corr = 100;
+            return rh_corr + id(humidity_offset);
         - offset: !lambda return id(humidity_offset);
         - sliding_window_moving_average:
             window_size: 20
@@ -786,8 +801,8 @@ sensor:
 
   - platform: tsl2591
     address: 0x29
-    update_interval: 1s
+    update_interval: 2s
-    integration_time: 200ms
+    integration_time: 600ms
     power_save_mode: no
     gain: auto
     device_factor: 53
@@ -836,7 +851,7 @@ binary_sensor:
     device_class: occupancy
     on_state:
       then:
-        - script.execute: presence_light_on
+        - script.execute: light_off
 
   - platform: gpio
     name: "PIR GPIO"
@@ -997,7 +1012,7 @@ switch:
 
 number:
   # Temperature offset:
-  # A calibration from -30 to +5 for the temperature sensor
+  # A calibration from -30 to +10 for the temperature sensor
   - platform: template
     name: "Temperature Offset"
     id: temperature_offset_setter
@@ -1013,12 +1028,12 @@ number:
             value: !lambda 'return float(x);'
 
   # Humidity offset:
-  # A calibration from -20 to +20 for the humidity sensor
+  # A calibration from -50 to +50 for the humidity sensor
   - platform: template
     name: "Humidity Offset"
     id: humidity_offset_setter
-    min_value: -20
+    min_value: -50
-    max_value: 20
+    max_value: 50
     step: 0.1
     lambda: |-
       return id(humidity_offset);