Add boot startup LED flashes

Helpful to signal successful boot when enclosed.
Convert PIR GPIO to pulldown
2025-09-22 01:13:29 -04:00 · 2025-09-21 01:01:11 -04:00 · 2025-09-21 01:00:45 -04:00
1 changed files with 10 additions and 1 deletions
--- a/supersensor.yaml
+++ b/supersensor.yaml
@@ -36,6 +36,14 @@ esphome:
            id(pir_presence).publish_state(false);
            id(light_presence).publish_state(false);
            id(radar_presence).publish_state(false);
    - priority: 100
      then:
        - light.turn_on:
            id: output_led
            effect: flash_white
        - delay: 2s
        - light.turn_off:
            id: output_led
    - priority: -100
      then:
        - if:
@@ -373,6 +381,7 @@ i2s_audio:
  - id: i2s_dummy
    i2s_lrclk_pin:
      number: GPIO15 # WS
      ignore_strapping_warning: true  # This isn't connected to anything anyways
    i2s_bclk_pin:
      number: GPIO14  # SCK
@@ -762,7 +771,7 @@ binary_sensor:
    id: pir_gpio
    pin:
      number: GPIO32
-      mode: INPUT_PULLUP
+      mode: INPUT_PULLDOWN
    internal: false
    device_class: motion
    on_press:
Author	SHA1	Message	Date
Joshua M. Boniface	eba065dd2d	Add boot startup LED flashes Helpful to signal successful boot when enclosed.	2025-09-22 01:13:29 -04:00
Joshua M. Boniface	4a416fa710	Convert PIR GPIO to pulldown As per [1] this is the suggested configuration. [1] https://community.home-assistant.io/t/am312-motion-sensors-going-crazy/335073/10	2025-09-21 01:01:11 -04:00
Joshua M. Boniface	b2845eb479	Ignore strapping warning on GPIO15 This is a dummy component anyways, so it doesn't matter.	2025-09-21 01:00:45 -04:00