93fdbf9bd9
Restore 1 decimal place to pressure values
...
Let the frontend round if it wants to.
2025-04-24 00:11:59 -04:00
b6c8bb24b3
Round final value of relative pressure
2025-04-24 00:06:49 -04:00
cf8838d5a5
Add relative pressure calculations
2025-04-23 23:59:30 -04:00
742f718a81
Set pressure accuracy decimals
...
Since we're rounding to an integer now.
2025-04-21 10:26:56 -04:00
839ac6ce2a
Round pressure to int, add pressure offset, names
...
Helps ensure barometric pressure is accurate against a given reference
value and ensure names are grouped together.
2025-04-21 09:45:27 -04:00
0829025989
Lower brightness of disconnect flash
2025-04-19 04:29:55 -04:00
58db260008
Add note for utemp
2025-04-04 11:23:39 -04:00
945ff816d5
Add IRR filter to utemp
2025-04-04 11:22:23 -04:00
72594a24bd
Adjust utemp calibration values
2025-04-02 12:15:00 -04:00
fafe2e8757
Add additional utemp diagnostics
2025-04-02 09:10:40 -04:00
0ac7a4f881
Add temperature offset to utemp
2025-04-01 17:11:46 -04:00
2bde1dae93
Update utemp GPIO settings
2025-04-01 17:03:36 -04:00
a707a15e7c
Add utemp (micro temperature) sensor
2025-04-01 13:30:20 -04:00
Joshua Boniface
27e02e27c0
Add funding configuration
2025-03-22 14:41:12 -04:00
Joshua Boniface
ccdff6a9ca
Use consistent true throughout
2025-03-22 12:36:55 -04:00
Joshua Boniface
2090da9278
Attempt to fix bugs with voice on startup
2025-03-20 02:24:31 -04:00
Joshua Boniface
cdc0982dcc
Mirror detect handler in clear handler
2025-03-20 02:06:07 -04:00
Joshua Boniface
79e4cac044
Remove fast_connect from WiFi
...
This breaks initial setup/compile.
2025-03-19 20:57:46 -04:00
Joshua Boniface
3cd2e75c16
Apply optimizations for state updates
...
Have been running into issues with states not being updated properly.
Apply several optimizations to help improve this.
2025-03-19 20:55:34 -04:00
1e2e37671d
Round illumination value to 1 decimal
...
Avoids constant updates to HASS that are useless.
2025-03-16 03:23:07 -04:00
efc5fd2773
Add similar humidity offset
2025-02-25 21:50:35 -05:00
12df19ac28
Add comment for temperature offset
2025-02-25 21:36:00 -05:00
82c613d41f
Raise BME680 update interval to 15s
...
Temperature doesn't swing that wildly.
2025-02-25 21:31:23 -05:00
92f0305f94
Add temperature offset support
...
Allows user configuration of a temperature offset for the BME680 sensor,
to help mitigate the effects of external heating from the ESP32, an
encosure, or other factors. A range of -7 to 3 is provided to permit
flexibility while recognizing that in *most* cases, it will be negative.
2025-02-25 21:22:37 -05:00
110b0e9c66
Return to 1s transitions
...
2s just felt too long.
2025-02-25 02:19:06 -05:00
b52c980268
Improve STT response handling
...
Newer versions of HASS provide different error messages than just the
previous one, so match any that begin with Sorry for errors. Also log
the response (INFO level) so we can see it.
2025-02-25 02:13:05 -05:00
7239706c35
Raise transition length to 2s
...
Makes transitions a bit less jarring.
2025-02-25 01:59:23 -05:00
d86ca8cb21
Add LED presence indication support
...
Adds a mode where the lights will be on "white" at 15% when presence is
detected. May be enabled or disabled from a new switch component.
2025-02-25 01:57:06 -05:00
eba941b9fd
Revert "Add more light off conditions"
...
This reverts commit 414de937e14b7799b679e27331cb6eee2dca2de3.
2025-02-22 01:42:43 -05:00
414de937e1
Add more light off conditions
...
Hopefully fixes stuck cyan light after VAD errors.
2025-02-18 00:39:04 -05:00
c32ff6064b
Revert previous BSEC2 changes
...
This library proved to be just as useless for reliable IAQ as the
original BSEC library (swinging wildly based on nothing at all), so
revert back to tag 1.2 and ESP-IDF.
2025-02-09 10:42:37 -05:00
64bbb01ab0
Revert "Fix incorrect names"
...
This reverts commit 07c15f60b4767d9726da791dc987770c82e977c4.
2025-02-09 10:42:11 -05:00
07c15f60b4
Fix incorrect names
2025-02-07 10:34:42 -05:00
88610bcdcc
Bump version and clean up README
2025-02-07 10:32:47 -05:00
d5dae4ea98
Return to arduino and try bsec2 library
2025-02-07 10:26:18 -05:00
82f56223f9
Fix IDF builds in 2024.12
2025-01-15 11:34:04 -05:00
c9fd651d23
Remove VAD threshold and lower noise suppression
2024-09-15 22:47:13 -04:00
85dddad06c
Go back to info log level
2024-07-13 00:58:56 -04:00
3b7c08868a
Fix is_running flag
2024-07-13 00:55:24 -04:00
2f3ff74b6b
Rework the status again
2024-07-13 00:53:25 -04:00
01e1b50392
Add restart after error
2024-07-12 02:54:22 -04:00
012fea6947
Revert "Further adjust VA restarting"
...
This reverts commit 0e142fa8dde9ca0fbd9114844ae7156380ba4981.
2024-07-12 02:52:09 -04:00
0e142fa8dd
Further adjust VA restarting
2024-07-12 02:47:45 -04:00
c1be262ad5
Enable debug logging
2024-07-12 02:45:07 -04:00
3c81295a93
Add stop before start
2024-07-12 02:43:33 -04:00
698a083751
Improve error detection
2024-07-12 02:40:20 -04:00
Joshua Boniface
3cb21f34d9
Add ESP_ADF support and VAD option as per [1]
...
[1] jlpouffier/voice-assistant-esphome-tutorial
2024-07-04 03:01:46 -04:00
Joshua Boniface
2cf593a91e
Go back to esp-idf
...
This seems to perform a lot better, and now that we're not using the
official Bosch sensor libraries, this is fine.
2024-07-04 02:46:33 -04:00
Joshua Boniface
9486a448dc
Adjust volume parameters as per [1]
...
[1] jlpouffier/voice-assistant-esphome-tutorial
2024-07-04 02:34:29 -04:00
c505ff7fd5
Increase volume multiplier to 3.0
2024-06-28 11:26:36 -04:00
