From 8deb042356ecfda318cf658b3a52025372e15b1e Mon Sep 17 00:00:00 2001 From: "Joshua M. Boniface" Date: Fri, 31 Mar 2017 05:41:16 +0000 Subject: [PATCH] Fix initial spaces to tabs --- bmc.sh | 214 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 107 insertions(+), 107 deletions(-) diff --git a/bmc.sh b/bmc.sh index a06dd6a..acf3866 100755 --- a/bmc.sh +++ b/bmc.sh @@ -8,64 +8,64 @@ bmcd_cmdpipe="/run/bmcd/bmcd.cmd" bmcd_statepipe="/run/bmcd/bmcd.state" help() { - echo -e "Available commands:" - echo -e " \e[1mstate\e[0m - Show the system power state" - echo -e " \e[1mconsole\e[0m - Connect to host via serial console; ^A+D to disconnect" - echo -e " \e[1mpower\e[0m - Press power switch on host" - echo -e " \e[1mreset\e[0m - Press reset switch on host" - echo -e " \e[1mkill\e[0m - Forcibly power off host" - echo -e " \e[1mlocate\e[0m - Enable locator (flash power LED)" - echo -e " \e[1munlocate\e[0m - Disable locator" - echo -e " \e[1mhelp\e[0m - This help menu" - echo -e " \e[1mbmc\e[0m - Show BMC information" - echo -e " \e[1mhostname\e[0m - Set BMC hostname" - echo -e " \e[1mpassword\e[0m - Set BMC password" - echo -e " \e[1mshell\e[0m - Start a BMC bash shell" - echo -e " \e[1mexit/logout\e[0m - Disconnect from the BMC" + echo -e "Available commands:" + echo -e " \e[1mstate\e[0m - Show the system power state" + echo -e " \e[1mconsole\e[0m - Connect to host via serial console; ^A+D to disconnect" + echo -e " \e[1mpower\e[0m - Press power switch on host" + echo -e " \e[1mreset\e[0m - Press reset switch on host" + echo -e " \e[1mkill\e[0m - Forcibly power off host" + echo -e " \e[1mlocate\e[0m - Enable locator (flash power LED)" + echo -e " \e[1munlocate\e[0m - Disable locator" + echo -e " \e[1mhelp\e[0m - This help menu" + echo -e " \e[1mbmc\e[0m - Show BMC information" + echo -e " \e[1mhostname\e[0m - Set BMC hostname" + echo -e " \e[1mpassword\e[0m - Set BMC password" + echo -e " \e[1mshell\e[0m - Start a BMC bash shell" + echo -e " \e[1mexit/logout\e[0m - Disconnect from the BMC" } bmcinfo() { - echo -e "BMC information:" - echo -e " IP address: $( ip -4 addr list eth0 | grep inet | awk '{ print $2 }' )" - echo -e " Hostname: $( hostname )" - echo -e " BMC temperature: $( sudo /opt/vc/bin/vcgencmd measure_temp | awk -F'=' '{ print $2 }' )" + echo -e "BMC information:" + echo -e " IP address: $( ip -4 addr list eth0 | grep inet | awk '{ print $2 }' )" + echo -e " Hostname: $( hostname )" + echo -e " BMC temperature: $( sudo /opt/vc/bin/vcgencmd measure_temp | awk -F'=' '{ print $2 }' )" } sethostname() { - echo -n "Enter new hostname: " - read newhostname - sudo sed -i '/^127.0.1.1/d' /etc/hosts &>/dev/null - sudo tee -a /etc/hosts <<<"127.0.1.1 $newhostname" &>/dev/null - sudo hostname $newhostname &>/dev/null - sudo tee /etc/hostname <<<"$newhostname" &>/dev/null - echo "Hostname set to $newhostname" + echo -n "Enter new hostname: " + read newhostname + sudo sed -i '/^127.0.1.1/d' /etc/hosts &>/dev/null + sudo tee -a /etc/hosts <<<"127.0.1.1 $newhostname" &>/dev/null + sudo hostname $newhostname &>/dev/null + sudo tee /etc/hostname <<<"$newhostname" &>/dev/null + echo "Hostname set to $newhostname" } setpassword() { - echo -n "Enter new BMC password: " - read -s password_1 - echo - echo -n "Reenter new BMC password: " - read -s password_2 - echo - if [ "${password_1}" == "${password_2}" ]; then - echo -n "Setting BMC password... " - sudo chpasswd <<<"bmc:${password_1}" - echo "done." - else - echo "Passwords to not match!" - fi + echo -n "Enter new BMC password: " + read -s password_1 + echo + echo -n "Reenter new BMC password: " + read -s password_2 + echo + if [ "${password_1}" == "${password_2}" ]; then + echo -n "Setting BMC password... " + sudo chpasswd <<<"bmc:${password_1}" + echo "done." + else + echo "Passwords to not match!" + fi } resetsw_press() { - echo "Pressing reset switch." + echo "Pressing reset switch." echo "resetsw_press" > ${bmcd_cmdpipe} } powersw_press() { echo "Pressing power switch." echo "powersw_press" > ${bmcd_cmdpipe} - sleep 2 + sleep 2 } powersw_hold() { echo "Holding power switch." echo "powersw_hold" > ${bmcd_cmdpipe} - sleep 2 + sleep 2 } locate_on() { echo "Enabling locator - host power LED will flash." @@ -76,12 +76,12 @@ locate_off() { echo "locate_off" > ${bmcd_cmdpipe} } readpower() { - powerstate_raw=$(cat ${bmcd_statepipe}) - if [[ "${powerstate_raw}" -eq 1 ]]; then - powerstate="\e[32mOn\e[0m" - else - powerstate="\e[31mOff\e[0m" - fi + powerstate_raw=$(cat ${bmcd_statepipe}) + if [[ "${powerstate_raw}" -eq 1 ]]; then + powerstate="\e[32mOn\e[0m" + else + powerstate="\e[31mOff\e[0m" + fi } readpower @@ -101,36 +101,36 @@ stty intr undef echo -en "\e[1m\e[34m[$(hostname)]>\e[0m " read input case $input in - 'state') - readpower - echo -e "Host state: $powerstate" - echo - ;; - 'console') - echo "Starting console..." + 'state') + readpower + echo -e "Host state: $powerstate" + echo + ;; + 'console') + echo "Starting console..." # Connect to screen, or start it - sudo screen -r serialconsole &>/dev/null || sudo screen -S serialconsole /dev/ttyUSB0 115200 + sudo screen -r serialconsole &>/dev/null || sudo screen -S serialconsole /dev/ttyUSB0 115200 # If the user killed screen, restart it - just in case pgrep screen &>/dev/null || sudo screen -S serialconsole /dev/ttyUSB0 115200 - echo - ;; - 'power') - powersw_press - readpower - echo -e "Host state: $powerstate" - echo - ;; - 'reset') - resetsw_press - readpower - echo -e "Host state: $powerstate" - echo - ;; - 'kill') - powersw_hold - readpower - echo -e "Host state: $powerstate" - echo + echo + ;; + 'power') + powersw_press + readpower + echo -e "Host state: $powerstate" + echo + ;; + 'reset') + resetsw_press + readpower + echo -e "Host state: $powerstate" + echo + ;; + 'kill') + powersw_hold + readpower + echo -e "Host state: $powerstate" + echo ;; 'locate') locate_on @@ -139,38 +139,38 @@ case $input in 'unlocate') locate_off echo - ;; - 'help') - help - echo - ;; - 'bmc') - bmcinfo - echo - ;; - 'hostname') - sethostname - echo - ;; - 'password') - setpassword - echo - ;; - 'shell') - stty sane - /bin/bash - help - echo - ;; - 'exit'|'logout') - exit 0 - ;; - '') - continue - ;; - *) - echo "Invalid command." - echo - ;; + ;; + 'help') + help + echo + ;; + 'bmc') + bmcinfo + echo + ;; + 'hostname') + sethostname + echo + ;; + 'password') + setpassword + echo + ;; + 'shell') + stty sane + /bin/bash + help + echo + ;; + 'exit'|'logout') + exit 0 + ;; + '') + continue + ;; + *) + echo "Invalid command." + echo + ;; esac done