From 981e9bda1b64aabe6bc540a846949c5d6551c283 Mon Sep 17 00:00:00 2001 From: Joshua Boniface Date: Fri, 17 Mar 2017 16:20:48 -0400 Subject: [PATCH] Added additional picture to the BMC post --- content/post/a-raspberry-pi-bmc.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/content/post/a-raspberry-pi-bmc.md b/content/post/a-raspberry-pi-bmc.md index feca771..ce0fc7e 100644 --- a/content/post/a-raspberry-pi-bmc.md +++ b/content/post/a-raspberry-pi-bmc.md @@ -56,6 +56,8 @@ The power and reset switches are a little more complex. While you can direct the ![My wiring diagram](/images/rpibmc/wiring-diagram-sans-serial.jpg) +![The finished breadboard](/images/rpibmc/breadboard-layout.jpg) + ### Cabling it up To keep everything neat, I used a through-hole solderable breadboard to mount all the components and keep everything neat. Header pins let us interface directly between the motherboard, Raspberry Pi, and the chassis buttons and LEDs using female-female jumper cables, again keeping everything nice and neat and easy to understand. The required components include two transitiors, two resistors, and a couple jumper wires. The transitors let us control the power and reset switches with a GPIO pin, while the resistors keep us from frying the LEDs (and the Raspberry Pi).